BAL King Pin Stabilizer
Our 3650 RK is a full 6' to the bottom of the king pin sitting in our driveway with the front jacks fully extended. There was a noticeable sway at that height which can be expected . We bought the BAL kingpin stabilizer but it came no where close to our height. We decided to put it between the front jacks with a board under it and it seems to work fine. There was a definate improvement of stability. They don't recommend it of course but it helps if your in the situation. I later found out they sell extender tubes but don't no for sure if they would have reached. If you install this other than the king pin remember to find an area with structural support and don't over tighten. This worked for us really well so far.
|