|
12-06-2007, 06:50 PM
|
#1
|
Montana Master
Join Date: Sep 2004
Location: Leona
Posts: 6,382
M.O.C. #2059
|
Hose ends
Is there any manufactured piece of equipment any sorrier than the ends of these white RV water hoses? They are flimsy, leaky, sorry trash. I hate leaky connections. So today I whacked off the female end and replaced it with more substantial brass repair end. The first test seems to be leakless.
|
|
|
12-07-2007, 12:17 AM
|
#2
|
Montana Master
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
|
No, there is not any worse, typical case of low bidder. I have replaced the ends of mine also. It's hard to even get a good repair end.
|
|
|
12-07-2007, 02:01 AM
|
#3
|
Montana Master
Join Date: Aug 2004
Location: Cedar Rapids
Posts: 4,876
M.O.C. #1944
|
I purchased mine from the Water Filter store. They all have brass ends--no leaks. They aren't cheap like the ones you buy at Wal-Mart.
Orv
|
|
|
12-07-2007, 02:16 AM
|
#4
|
Montana Master
Join Date: Jan 2003
Location: Haldimand County
Posts: 2,413
M.O.C. #122
|
Ace hardware stores have good hoses with solid brass connectors. (but not in white at the store I was in).
|
|
|
12-07-2007, 03:58 AM
|
#5
|
Montana Master
Join Date: Feb 2005
Location: Pagosa Springs
Posts: 3,711
M.O.C. #3120
|
I think the twisting on and twisting off is what makes the brass part of the hose end to fail.
Hose quick connectors can save your hoses and your time. I tried the brass ones, but they are not all built the same so they are not interchangeable. They are also expensive.
At Home Depot, they sell Melnor hose quick connects. Melnor is easily found at any Home Depot and thus can easily be replaced in case of failure. By buying them for every end, the different combinations, depending on the hookup, can easily be modified to fit the situation. No leaks.
|
|
|
12-07-2007, 04:15 AM
|
#6
|
Montana Master
Join Date: Nov 2002
Location: Weatherford
Posts: 1,383
M.O.C. #9
|
Every hose and accessory I have at home (and there are a BUNCH) has the Home Depot/Lowes Melnor plastic quick connectors. When they start leaking, I chunk them and replace with a new one. At home my issue is not so much the leaking but the hassle of having to screw on and off the fitting when I can just snap it on or off. I have used them RVin' also but was concerned about the weight of the hose at the RV entry point.
|
|
|
12-07-2007, 05:28 AM
|
#7
|
Montana Master
Join Date: Sep 2003
Location: Sunshine
Posts: 1,445
M.O.C. #538
|
Like Orv said. The Water Filter Store has good connectors in brass and stainless both.
|
|
|
12-07-2007, 07:01 AM
|
#8
|
Montana Master
Join Date: Aug 2004
Location: Cedar Rapids
Posts: 4,876
M.O.C. #1944
|
I have been using quick disconnect fittings to connect to my filters and from the filters to the rig. Work very well and can be purchased at any hardware store (I got mine at Ace0 in the hose and fittings department.
Orv
|
|
|
12-07-2007, 07:47 AM
|
#9
|
Montana Master
Join Date: Jan 2006
Location: South
Posts: 2,499
M.O.C. #5140
|
I agree with simonsrf: the brass quick-connects work very well. While we get ours from Home Depot, you have to sort of weigh each one out of the box. The really light ones (seems they are changing specs to save money, but charging more...) are no good, in my opinion. The heavier ones have never leaked.
Walmart also sells them, but for a few dollars more, in the RV section.
|
|
|
12-07-2007, 08:02 AM
|
#10
|
Montana Master
Join Date: Feb 2005
Location: Pagosa Springs
Posts: 3,711
M.O.C. #3120
|
Orv,
I agree with you that the brass ones are far superior to the cheap plastic Melnor ones I buy. The problem I have is that the brass ones are not all the same or interchangeable, learned that lesson a while ago when I tried to match some that I had been using for years. You have to keep the same brand name to same brand name. Typically the brass ones can cost about $9.50 for a male to female pair. http://tinyurl.com/2gjse6
This one has proven to be a good alternative for me, the price is a lot cheaper. I bought M/F connector for $2.00 for the pair at Home Depot..I am currently using 8 M/F connections right now, and have several other hose connectors on various other hose accessories. http://tinyurl.com/2dtvll
|
|
|
12-07-2007, 08:36 AM
|
#11
|
Montana Master
Join Date: Mar 2007
Location: Virginia Beach
Posts: 710
M.O.C. #6958
|
I have my winter hose sitting in the back of my truck right now til I can get a repair kit and fix it. In my case it wasn't the brass/metal ends but the actual hose about 1/2 inch in from the end that has a small hole in it. Could never get that sucker to stop leaking .... finally figured out where the leak was from and no amount of tightening was going to stop it.
__________________
Bill and Lisa Rearick
2023 Grand Design Reflection 367BHS
2020 GMC SIERRA 2500 Denali, 8 ft bed, SRW, Duramax Diesel w/10 speed Alison Transmission.
|
|
|
12-14-2007, 01:44 PM
|
#12
|
Montana Master
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
|
I seem to have leaking problems with the quick connects from Home Depot, too. Even the brass ones. Are these the same sold at Ace Hardware?
I also have problems with those hose ends. I think I'll consider the replacement ends mentioned in this thread.
The hoses, non-white, at Ace Hardware that OntMont mentioned, are those for drinking water use?
|
|
|
12-14-2007, 01:54 PM
|
#13
|
Montana Master
Join Date: Sep 2004
Location: Leona
Posts: 6,382
M.O.C. #2059
|
Most colored hoses have a drinking water disclaimer. I have seen one blue coiled hose with "good for drinking water" on the label. It was $23 at an RV store.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|