Thicker walled tanks is the real answer or military grade cross linked poly. To hold failures at bay with our existant tanks, our only options are supports to lessen their bloating as being filled...or maybe adding fiberglass/resin to the sides and bottom, but I think bonding to the tank would be critical and iffy. I was thinking of plywood or starboard under my galley tank supported by the straps I put in place when I mended it after the last failure. A wintertime project when not on the road anyway. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|