|
08-05-2013, 12:09 PM
|
#1
|
New Member
Join Date: Aug 2011
Location: Gilbert
Posts: 4
M.O.C. #11643
|
How to Jack UP a 2955 RL
Ladies and Gentlemen,
I am going around and around on how to jack up my 2955 Easley. The bottle jack works but it requires a lot to get it done. I tried Trailer-Aid today and it will not lift the other wheel off the ground. Called Trailer-Aid and they said that with Morey-ride their product will not work.
Any body found a better way for me to change brakes or a flat tire other than a bottle jack on the fram?
Festus Burchfield
|
|
|
08-05-2013, 01:48 PM
|
#2
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Bottle jacks and heavy duty jack stands seem to be a good answer.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
08-05-2013, 02:14 PM
|
#3
|
Montana Master
Join Date: Nov 2007
Location: Atlanta
Posts: 908
M.O.C. #7915
|
Put lumber under the jack if it won't go high enough.
|
|
|
08-05-2013, 04:13 PM
|
#4
|
Montana Fan
Join Date: Jun 2011
Location: Santa Fe
Posts: 270
M.O.C. #11454
|
good question
on a flat i had i bottled jacked on the axel it worked but word is don't mess with the axels
also it did take a lot of action on the jack as the suspension really rocked till the good tire topped out
i also picked up a trailer aid and it didn/t do the job, next time i plan to put a few leveler pads under aid
mikey
|
|
|
08-05-2013, 05:04 PM
|
#5
|
Montana Master
Join Date: Nov 2003
Location: Santa Fe Springs
Posts: 4,189
M.O.C. #639
|
Just the way I did mine 2 each. 4 pieces .. 2x10 x 15 inches long nailed together. then 1 each 2 pieces 2x10 x 12 inches nailed together and 1 each 1 piece 2x10 12 inches long. butt the 2 pieces 15 inches long end to end then put the 1 that is stacked 2 pieces high in front of those then the 1 piece you are making a ramp more or less pull the trailer up and have each wheel on one of the 15 inch long pieces. leave the truck connected for stability. get your bottle jack and lift one axel remove one of the 15 inch long boards next use a jack stand that is able to hold 4 tons under that axel. do the same to the next axel. you can remove the tires on one side of the monty at a time. reverse order to get back off. or go buy 2 bottle jacks 12 ton each and lift both axels at the same time the only problem is getting the wheels low enugh to clear the skirting that why i did the boards.
__________________
Pulling a 2004, 2980 RL an oldie but goodie.
Tow vehicle is a 2009 RED RAM 3500 DRW.
|
|
|
08-05-2013, 06:16 PM
|
#6
|
Montana Master
Join Date: Dec 2004
Location: Bum F Egypt
Posts: 979
M.O.C. #2733
|
6" Bottle jack under the outer u-bolt.
|
|
|
08-05-2013, 06:44 PM
|
#7
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
I'll second Dennis's method. I'm curious as to the original posters comment ... "requires a lot to get it done". Throw a piece of wood on the ground ... place jack on top of wood under or in-between U-bolts ... pump the jack 2 - 3 dozen strokes while placing a jack stand near by for good measure ... remove tire. What am I missing?
|
|
|
08-06-2013, 02:33 AM
|
#8
|
New Member
Join Date: Aug 2011
Location: Gilbert
Posts: 4
M.O.C. #11643
|
Thanks to all who responded to my Jacking up the 2955.
I will finish the brake change today with all of your ideas. I was just trying not to jack on the axels themselves.
Thanks
Festus
|
|
|
08-06-2013, 02:44 AM
|
#9
|
Montana Master
Join Date: Dec 2009
Location: Sebring
Posts: 3,669
M.O.C. #9969
|
The object is not to put the jack directly on the axle tube, but place it under the spring pad, puts no more pressure on the suspension that way then it would get driving over one of those speed humps you find in some campgrounds. Or if you lucky as some of us with the Level-up System, you just raise the rig up.
__________________
Michelle & Ann
2018 Chevy 3500HD High Country DRW 4X4 Crew Cab w/Duramax/Allison, Formally 2010 Montana 2955RL, Now Loaded 2016 SOB, Mor/ryde IS, Disc Brakes & Pin Box, Comfort Ride Hitch, Sailun 17.5 Tires.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
2955 slides
|
Warren Wayland |
Montana Problems, Problem Solving & Technical Help |
9 |
04-09-2011 03:02 PM |
2955 again
|
uncdodge |
General Discussions about our Montanas |
14 |
08-21-2010 10:55 AM |
Our 2955 has a fireplace!
|
Lije Baley |
Additions & Improvements |
5 |
08-14-2006 03:48 PM |
Looks like a 2955 RL for us
|
bobneal |
New Member Introductions |
12 |
03-16-2006 04:00 AM |
'04 or '05 - 2955?
|
2007dura |
General Discussions about our Montanas |
14 |
12-10-2004 02:17 PM |
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|