|
02-23-2012, 02:28 PM
|
#1
|
Seasoned Camper
Join Date: Oct 2010
Location: Wichita
Posts: 84
M.O.C. #10846
|
Water Heater Flush
I want to flush my water heater tank. How can I fill only the tank with a 50/50 water-vinegar mix without putting the mix into the whole system? Should the water heater by-pass be used for this?
__________________
Larry and Sandy
2015 GMC Denali and 2011 Montana 3400RL
|
|
|
02-23-2012, 02:48 PM
|
#2
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,727
M.O.C. #7992
|
The only way I can think of is to mix the correct amount of solution to fill your tank. Make sure your pump is off and no city water hooked up and by pass is in closed position Remove your pressure relief valve and run solution into tank with either a hose or funnel from your premixed container. Let it soak then remove the anode rod to drain, then rinse the tank. Just curious why you think the tank needs to be flushed on such a new unit? Jim
__________________
2006 3000RK
2009 Ram 2500
|
|
|
02-23-2012, 06:20 PM
|
#3
|
Montana Master
Join Date: Nov 2003
Location: Santa Fe Springs
Posts: 4,189
M.O.C. #639
|
If anything a good Blasting with the water heater wand I would think that would be enugh. doing the vinegar thing sounds like you have a lot of time to let it soak and disolve the calcum.
__________________
Pulling a 2004, 2980 RL an oldie but goodie.
Tow vehicle is a 2009 RED RAM 3500 DRW.
|
|
|
02-24-2012, 01:06 AM
|
#4
|
Montana Fan
Join Date: Feb 2012
Location: Homosassa
Posts: 307
M.O.C. #12211
|
Quote:
quote:Originally posted by jimcol
The only way I can think of is to mix the correct amount of solution to fill your tank. Make sure your pump is off and no city water hooked up and by pass is in closed position Remove your pressure relief valve and run solution into tank with either a hose or funnel from your premixed container. Let it soak then remove the anode rod to drain, then rinse the tank. Just curious why you think the tank needs to be flushed on such a new unit? Jim
|
That sounds like a good plan yhat will do what you want.
|
|
|
02-24-2012, 01:28 AM
|
#5
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
I have a thin tube I connect to a hose, take out the anode rod, and then flush out with the hose. Has worked well over the years, I only do this when I decide to check the anode rod. As indicated, the hotwater bypass should keep your mixture out of the rest of the fiver.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
02-24-2012, 07:50 AM
|
#6
|
Montana Fan
Join Date: Feb 2011
Location: Silverton
Posts: 489
M.O.C. #11144
|
I agree with Trailer Trash 2...
|
|
|
02-26-2012, 04:05 AM
|
#7
|
Montana Master
Join Date: Mar 2010
Location: Land O Lakes
Posts: 2,783
M.O.C. #10246
|
We use a hose extension designed for flushing the water heater tank...so far, that seems to have been enough to get the job done.
|
|
|
02-26-2012, 04:43 AM
|
#8
|
Montana Fan
Join Date: Oct 2008
Location: Harvey
Posts: 329
M.O.C. #8863
|
Quote:
quote:Originally posted by 1retired06
I have a thin tube I connect to a hose, take out the anode rod, and then flush out with the hose. Has worked well over the years, I only do this when I decide to check the anode rod. As indicated, the hotwater bypass should keep your mixture out of the rest of the fiver.
|
X2
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|