|
04-03-2017, 11:25 AM
|
#1
|
Montana Fan
Join Date: Mar 2004
Location: Bristol
Posts: 396
M.O.C. #1269
|
Removing Interior Light Covers
In our 2013 Montana our interior lights are covered with round, flush mounted plastic covers. I'm trying to remove them and they are very tight and don't seem to turn. It almost seems like you could pull them off but they give a lot of resistance and I'm afraid that I'm going to crack them if I pull too hard. Does anyone have experience removing these and placing them back on?
|
|
|
04-03-2017, 11:56 AM
|
#2
|
Montana Master
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 3,198
M.O.C. #13740
|
Mine was built right before the change so I am no help other than to say "can you pull down on the fixture which would allow for gripping of the fixture while trying to rotate the cover off?
|
|
|
04-04-2017, 07:12 AM
|
#3
|
Montana Master
Join Date: Nov 2005
Location: Paola
Posts: 5,739
M.O.C. #4961
|
They are hard to do . You have to push up and turn at the same time. Some are mounted too deep and that is why you have to push up. Once you get it off there are some little tabs you can bend down and it will make it easier the next time. If you check around you should find one that is easy. Then you will be able to see how they work.
__________________
Dennis & Linda Ward
Paola, Kansas
Montana 3735MK Legacy Edition
1200 watts of Solar
|
|
|
04-04-2017, 07:01 PM
|
#4
|
Montana Master
Join Date: May 2010
Location: Rock Island
Posts: 1,074
M.O.C. #10457
|
Like Mudchief said, find the one that is loose and look at how it works.
|
|
|
04-05-2017, 07:57 AM
|
#5
|
Montana Master
Join Date: Mar 2013
Location: Frostproof, FL USA
Posts: 2,362
M.O.C. #13272
|
My 2014 3725RL was the same way. I probably had two or three that would twist off and all the others were installed too tight. One was not working and after waiting several months and two warranty visits with my dealer (we were full time then) I have up and started hounding Keystone to just send me a new replacement. At about the 10 month mark I finally received the new LED fixture. When I changed it out I discovered that it was wired wrong from the factory and worked fine. So if you are taking one off because it isn't working you may not need a new fixture.
__________________
Previous: 2008 Montana 3400RL & 2014 3725RL
Current: Full Time 2022 SOB TT Toy Hauler
|
|
|
04-29-2018, 10:17 PM
|
#6
|
New Member
Join Date: Mar 2018
Location: Statesville
Posts: 7
M.O.C. #21367
|
Does this apply to the touch on/off fixtures?
|
|
|
04-30-2018, 11:33 AM
|
#7
|
Montana Master
Join Date: Sep 2017
Location: Tacoma
Posts: 1,567
M.O.C. #20475
|
Yes for them to.
|
|
|
04-30-2018, 12:18 PM
|
#8
|
New Member
Join Date: Mar 2018
Location: Statesville
Posts: 7
M.O.C. #21367
|
Thanks for reponse. I tried just twisting off but it was too tight to the ceiling. Used a flat screwdriver to slip between fixture & ceiling and was then able to twist off.
|
|
|
09-02-2021, 06:16 PM
|
#9
|
Established Member
Join Date: Aug 2019
Location: a town
Posts: 26
M.O.C. #24736
|
Replacement bedroom light covers?
Does anyone know if you can get different colored ones of these?
They are so bright we can't really use them to read in bed, so wonder if there are some that are tinted or otherwise limit the light some so that they are usefull.
These are the two little ones over the headboard of the bed, as discussed above.
Thanks if you do.
__________________
2015 36' Montana
2020 Ford F350
|
|
|
09-03-2021, 05:04 AM
|
#10
|
Montana Master
Join Date: Oct 2019
Location: Jacksonville
Posts: 2,237
M.O.C. #25165
|
I installed a dimmer switch on the bedroom lights as they are really bright when lying in the bed. Otherwise, you could put a colored foil inside the cover to dim it a bit and add color as well. Just cut to fit.
__________________
Robert & Diana McNeal
2019 Montana Legacy 3791RD 20th Anniversary Edition
2014 F350 4x4 6.7L SRW
|
|
|
09-03-2021, 09:44 AM
|
#11
|
Established Member
Join Date: Aug 2019
Location: a town
Posts: 26
M.O.C. #24736
|
Thanks very much, Robert.
__________________
2015 36' Montana
2020 Ford F350
|
|
|
09-12-2021, 08:29 PM
|
#12
|
Montana Fan
Join Date: Aug 2016
Location: Eagan, MN
Posts: 107
M.O.C. #18907
|
I can’t get any off
Does the base screw into the ceiling? Some have a set of clips that hold it on. I can’t get ANY off to look at how the lens holds on.
__________________
Kris & Al
2014 Montana 3402RL, Disk brakes, Sailun S637
2019 RAM 3500 Laramie 6.7 Cummins, PullRite 2900 SuperGlide
|
|
|
09-13-2021, 03:33 AM
|
#13
|
Montana Master
Join Date: Oct 2019
Location: Jacksonville
Posts: 2,237
M.O.C. #25165
|
The round base has screws that hold it to the ceiling. The base has tabs around the edge that the lens cover slip onto then turn about a quarter turn to engage (maybe less). I have one of the old style rubber strap pipe wrenches that came in a tool set I got years ago and never used until now. I wrapped it around one of the lenses to get grip to turn counter clockwise, then pushed up on the lens while turning. Some are really tough to get off the base. If you have one of the rubber pads to assist with opening jars, that might help too. Just push up really hard and turn CCW.
__________________
Robert & Diana McNeal
2019 Montana Legacy 3791RD 20th Anniversary Edition
2014 F350 4x4 6.7L SRW
|
|
|
09-13-2021, 08:22 AM
|
#14
|
Montana Master
Join Date: Feb 2020
Location: SoCal
Posts: 625
M.O.C. #25842
|
Quote:
Originally Posted by Kris & Al
Does the base screw into the ceiling? Some have a set of clips that hold it on. I can’t get ANY off to look at how the lens holds on.
|
Here are pictures of mine:
|
|
|
09-14-2021, 07:43 AM
|
#15
|
Montana Fan
Join Date: Aug 2016
Location: Eagan, MN
Posts: 107
M.O.C. #18907
|
Thanks! Let you know.
__________________
Kris & Al
2014 Montana 3402RL, Disk brakes, Sailun S637
2019 RAM 3500 Laramie 6.7 Cummins, PullRite 2900 SuperGlide
|
|
|
12-25-2021, 01:33 PM
|
#16
|
Established Member
Join Date: Oct 2021
Location: Garden bay
Posts: 10
M.O.C. #29839
|
Lights to bright
Quote:
Originally Posted by RMcNeal
I installed a dimmer switch on the bedroom lights as they are really bright when lying in the bed. Otherwise, you could put a colored foil inside the cover to dim it a bit and add color as well. Just cut to fit.
|
Awesome 12v wiring colors?
|
|
|
12-25-2021, 01:53 PM
|
#17
|
Montana Master
Join Date: Oct 2019
Location: Jacksonville
Posts: 2,237
M.O.C. #25165
|
IIRC, they were green/white. The switch had the green and all white wires were tied together as ground.
__________________
Robert & Diana McNeal
2019 Montana Legacy 3791RD 20th Anniversary Edition
2014 F350 4x4 6.7L SRW
|
|
|
07-16-2023, 05:04 PM
|
#18
|
Seasoned Camper
Join Date: Jun 2020
Location: Elizabeth
Posts: 52
M.O.C. #26505
|
I have never heard of colored foil. Where can I find some?
__________________
Pat & Amy
2019 Montana 3791RD, 20th Anniversary Edition
2006 GMC Duramax Crew Cab
Airbags, Andersen Hitch
|
|
|
07-16-2023, 06:45 PM
|
#19
|
Montana Master
Join Date: Oct 2019
Location: Jacksonville
Posts: 2,237
M.O.C. #25165
|
Colored foil should be available at most craft stores. Maybe even WalMart.
__________________
Robert & Diana McNeal
2019 Montana Legacy 3791RD 20th Anniversary Edition
2014 F350 4x4 6.7L SRW
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|