|
04-12-2022, 10:38 AM
|
#1
|
New Member
Join Date: Nov 2021
Location: Pedricktown
Posts: 4
M.O.C. #30146
|
Ceiling Fan blade hit slide and broke
Today as I was retracting slide the ceiling fan blade caught the top of the trim and broke the blade in half. Has anyone had this happen to them? I know from past experiences with ceiling fans that the blades will tend to sag over time, and the clearance on these fans is very tight to start with. If anyone has had this happen to them, were you able to purchase replacement blades? Thanks for any help,
|
|
|
04-12-2022, 10:48 AM
|
#2
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,690
M.O.C. #4831
|
It seems the big box stores (Lowes, Home depot, Menards, etc.) have replacement blade kits that may work. Then there is always the Trekwood (expensive) option. Here are a couple of Threads from the past about broken fan blades.
https://www.montanaowners.com/forums...ad.php?t=71535
https://www.montanaowners.com/forums...ad.php?t=54711
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
04-12-2022, 10:59 AM
|
#3
|
Montana Master
Join Date: Oct 2004
Location: Salem
Posts: 7,669
M.O.C. #2283
|
I loaned my HC to a neighbor and they broke one of mine. The very same way.
Lynwood
|
|
|
04-12-2022, 11:58 AM
|
#4
|
Montana Master
Join Date: May 2011
Location: Hixson
Posts: 3,436
M.O.C. #11397
|
When you buy replacements I believe you can get blades for exterior fans that are moisture and sag resistant.
__________________
2018.5 Montana 3791RD
Full Timers 9/1/2010 through 1/16/2020.
|
|
|
04-12-2022, 12:24 PM
|
#5
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
Screws loosened on ours one time and I didn't notice ... caught the slide as you mentioned. I measured the fan blades and got a similar set at Lowe's. All I had to do was drill the matching holes from the blade brackets to the new blades. If the blades are very close to the slide facia .. you can ever so gently bend the blade brackets towards the ceiling a bit. They are pot metal.
|
|
|
04-12-2022, 07:03 PM
|
#6
|
Seasoned Camper
Join Date: Jun 2021
Location: Wilmar
Posts: 54
M.O.C. #29050
|
Ceiling fan blades
We have to watch and make sure our blades are not hitting when we run our slides in on our 305 HC. They too will hit the slides if not stopped in right spot. Another design issue!
|
|
|
04-12-2022, 07:11 PM
|
#7
|
Montana Master
Join Date: Jan 2022
Location: Shingle Springs
Posts: 2,574
M.O.C. #30417
|
I just checked mine and wow you would really have to have a saggy blade! I've got a good 5" of clearance. Maybe a lower profile fan?
__________________
Tony & Donna & the best dog ever, Murphy.
2022 Montana HC, 295RL, Solar Flex 400, Onan 3600 LPG, 2K inverter, 200AH Lithium. 2020 GMC Denali 2500 6.6 Duramax, Demco 21K Auto Slide
|
|
|
04-12-2022, 07:58 PM
|
#8
|
Established Member
Join Date: Apr 2019
Location: Bakersfield
Posts: 21
M.O.C. #23754
|
Etrailer
I ordered these and they worked perfectly
|
|
|
04-13-2022, 01:07 PM
|
#9
|
Montana Fan
Join Date: Mar 2020
Location: Belpre
Posts: 171
M.O.C. #25951
|
I had a spare set for about a year that I finally got rid of, I would have mailed it to ya! I've replaced mine because the motor burnt out, and the OEM replacement has done the same thing. Next one is going to be a different model.
__________________
Andy + Shari (plus our furry friends Goose and Huge). Fulltiming since 3/2020. 2020 Montana 3855BR. 2016 RAM 3500 SRW Tradesman with Tow/Haul package. Curt E16 Slider Hitch.
|
|
|
04-13-2022, 01:38 PM
|
#10
|
Site Team
Join Date: Apr 2011
Location: Flint
Posts: 489
M.O.C. #11318
|
Our ceiling fan also started drooping and finally broke a blade. Fortunately, the Annual Fall Montana Rally was the following month and Keystone Montana replaced the fan with a new one free of charge during the rally.
|
|
|
04-13-2022, 02:39 PM
|
#11
|
Montana Fan
Join Date: Jan 2020
Location: Hilliards
Posts: 238
M.O.C. #25636
|
I took an afternoon and made new blades for our 330. I just made them 2 inches shorter so it will never happen...again
__________________
2020 MHC 330RL
2021 F350 DRW 6.7 Powerstroke
Retired and Rollin'!
|
|
|
04-17-2022, 01:17 PM
|
#12
|
New Member
Join Date: Oct 2020
Location: Ocala
Posts: 4
M.O.C. #27411
|
It's happened to us, etrailer.com. item 277-000398.
Good luck.
|
|
|
04-17-2022, 04:16 PM
|
#13
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,328
M.O.C. #17894
|
Yep had the same exact thing happened. While bringing the slide and I heard a snap and there it went. I replace the whole ceiling fan with the ceiling hugger model.
I installed some very small eye hooks in the ceiling with tiny bungee cords to pull the blinds up during travel.
As long as you remember to remove the bungee cords it's all good. Lol
|
|
|
04-17-2022, 08:31 PM
|
#14
|
Montana Master
Join Date: Feb 2008
Location: woodstock
Posts: 565
M.O.C. #8174
|
Lowes are Home Depo have the blades
__________________
Ed
Montana Master
Woodstock Ga
2020 3931 FB Legacy
|
|
|
04-27-2022, 08:47 PM
|
#15
|
Established Member
Join Date: May 2021
Location: Pullman
Posts: 23
M.O.C. #28686
|
Same happened to us last year. We were able to find replacements. I think I ordered from Amazon. The color wasn't exact to the originals. I believe the middle hole did not line up correctly so had to drill a new one. Also removed the arms from the fan and bent slightly up to increase clearance above the slide. Replacements and slight adjustment have worked well. A solid 1 inch clearance now on all blades.
__________________
SparkCV
2014 F350 SD 6.7L Diesel Crew Cab 4x4 Short Bed
2011 Montana 3400RL
|
|
|
04-27-2022, 08:55 PM
|
#16
|
Montana Master
Join Date: Aug 2004
Location: Livermore
Posts: 5,183
M.O.C. #1920
|
I recommend using blue Loctite on the screws when reinstalling. Ours used to come loose before using Loctite.
__________________
Ron and Terrie Ames plus Meg - MOC #1920/KF0NTA
2021Montana 3230CK Super Solar+ Legacy Package
2021 Ram 3500 Laramie Longhorn, BIM Charging
4x4, SRW, LB, Crew Cab, Pullrite 3900 Hitch
|
|
|
04-28-2022, 05:17 AM
|
#17
|
Montana Fan
Join Date: Feb 2018
Location: Arlington
Posts: 136
M.O.C. #21176
|
I have had the brackets that hold the fan blades on break, but not the blades
__________________
2011 Volvo 780 485 HP/1750 TQ 13 Speed 32000 lb ET air ride hitch
2016 Montana 3820FK Legacy package
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|