|
07-06-2020, 05:31 PM
|
#1
|
Established Member
Join Date: Sep 2019
Location: BIRMINGHAM
Posts: 11
M.O.C. #25008
|
Levelers
I have a 2019 381th and can't reset the module. All 6 levels are completely up. Any help out there? If I disconnected the batteries would that reset it? Thanks in advance, Pete
|
|
|
07-06-2020, 05:44 PM
|
#2
|
Montana Master
Join Date: Sep 2017
Location: Florence
Posts: 963
M.O.C. #20472
|
Are you saying they won’t go down when you push the level button
__________________
2018 Ram 3500 MegaCab 4x4 Aisin, 4:10 Gears
Titan 50 Gal Tank, Air Lift Wireless Bags
2017 3160 RL
|
|
|
07-06-2020, 05:54 PM
|
#3
|
Established Member
Join Date: Sep 2019
Location: BIRMINGHAM
Posts: 11
M.O.C. #25008
|
Sorry, the automatic leveling system won't reset. Manually they work.
|
|
|
07-06-2020, 06:17 PM
|
#4
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
run them all down at least 6 inches and then retract them. See if the clears the error
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
07-06-2020, 06:19 PM
|
#5
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,695
M.O.C. #4831
|
If the jacks work manually, but the Auto Level doesn't, then perhaps the "brain" lost its Auto Level Calibration. You should level the unit manually then follow the procedure for "Zero Point Calibration". The 1st Post in this Thread will give a link to LCI's procedure.
https://www.montanaowners.com/forums...ad.php?t=71009
Basically, turn the system OFF;
Press "Front" 10 times quickly;
Press "Rear" 10 times quickly;
and follow the reset instructions.
Note: it has to be exactly 10 times on each button or the process won't work.
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
07-06-2020, 06:20 PM
|
#6
|
Montana Master
Join Date: Oct 2018
Location: Anderson
Posts: 2,788
M.O.C. #22835
|
If yours is the LCI 6 point or 4 point leveling system, it sounds like you just need to reset the system. It's fairly easy to do. Lower each jack half way down (at least extend them 6 inches. Then retract all at the same time. System reset.
If that doesn't work, then your system may have lost it's "level" position, in which case you need to follow the manual to reset "level". There are a few steps that need to be followed in a specific order. It's not hard, it's just intimidating if you've never done it before.
Here's a link to the LCI Level Up manual that covers all the systems. Find yours and follow the directions for "Zero Point Calibration".
Click here for PDF manual
__________________
History is not about the past, it's an explanation of the present.
2019 Montana High Country 375FL
2014 Chevy Silverado Duramax, 6.6L Dually
|
|
|
07-06-2020, 06:20 PM
|
#7
|
Established Member
Join Date: Sep 2019
Location: BIRMINGHAM
Posts: 11
M.O.C. #25008
|
Will try, thanks
|
|
|
07-07-2020, 04:19 PM
|
#8
|
Established Member
Join Date: Sep 2019
Location: BIRMINGHAM
Posts: 11
M.O.C. #25008
|
Quote:
Originally Posted by DutchmenSport
If yours is the LCI 6 point or 4 point leveling system, it sounds like you just need to reset the system. It's fairly easy to do. Lower each jack half way down (at least extend them 6 inches. Then retract all at the same time. System reset.
If that doesn't work, then your system may have lost it's "level" position, in which case you need to follow the manual to reset "level". There are a few steps that need to be followed in a specific order. It's not hard, it's just intimidating if you've never done it before.
Here's a link to the LCI Level Up manual that covers all the systems. Find yours and follow the directions for "Zero Point Calibration".
Click here for PDF manual
|
That worked perfectly! Thanks alot.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|