|
|
07-31-2018, 02:10 PM
|
#1
|
Montana Fan
Join Date: May 2018
Location: Goldbar, WA.
Posts: 168
M.O.C. #21854
|
Adding an electric shorepower cord reel
I have a 2018 3950BR. I purchased it near the end of the model year to get better pricing (or at least that was the idea). Unfortunately there were no Legacy models to be had...anywhere. (And, thanks to the power of the internet, I literally did check everywhere.)
I'm mostly okay with that, but one feature I wanted but didn't get was the power reel for the 50 amp shore power cord. I'd really like that. I'm not a huge fan of dragging it out and even less so of trying to roll it up, clean the yuk off it and putting it back in my basement.
I'm wondering if it's possible to retro-fit the power reel system into my unit and what that might take?
I don't have the technical savvy to pull that off myself, but I'm not above paying for a pro to do it...if it's possible.
Has anyone done a conversion like this? Forum searches show folks using manual reels for storage, but not a full power add on. I'm a 3 AC kinda guy and always use 50 amp service.
Thoughts?
__________________
2018 3950BR - MORryde X-Factor, Disc Brakes, 3rd AC, Stacked W/D, Winegard Trav'ler (DTV), 2000w inverter, EMS-HW50C
2022 Ford F-450 Limited Diesel Dually - B&W 25k Hitch
|
|
|
07-31-2018, 05:21 PM
|
#2
|
Montana Master
Join Date: Jan 2018
Location: Thornville
Posts: 546
M.O.C. #21110
|
My thoughts are....The power reel is a waste of money.
I DO have the manual Morryde Cord reel,installs with 4 screws. It also holds my stock 50amp cord, with a little room to spare ,but not enough for an extension cord too. While hand reeling it in,I hold the cord in a shop rag to wipe it off as being stowed, and also allows me to feel for any breaks in the insulation of the cord.
Wouldn't give it up , I really like that add-on !!!
__________________
Darwin & Carla
2018.5 3701LK Montana
2022 3500HD Denali Duramax SRW
|
|
|
07-31-2018, 07:14 PM
|
#3
|
Montana Master
Join Date: May 2017
Location: South East NC
Posts: 1,768
M.O.C. #19865
|
Found this one long ago. Mounted it with wing nuts in the basement. Makes it easier for an old guy with a bad back. eTrailer and another site beat Amazon..
__________________
John & Patty
2022 3855 BR
2019 Lariat F350 4X4 Dually
|
|
|
07-31-2018, 08:10 PM
|
#4
|
Montana Fan
Join Date: Jun 2017
Location: WESTMINSTER
Posts: 159
M.O.C. #20081
|
I have the same one CaptnJohn has and much easier then rolling it up and lighter also.
|
|
|
07-31-2018, 09:30 PM
|
#5
|
Montana Fan
Join Date: Oct 2017
Location: Moultrie
Posts: 250
M.O.C. #20747
|
As CarWin, I use the Morryde manual reel which is easy to use while wiping the line with a rag. If Keystone engineers actually had to use the Montana they would have long ago quit putting the shore line receptacle on the backend years ago. It would be less expensive ( less wire ) and would save us from having to handle long shore lines and sometimes extensions.
__________________
Frank and Marilyn
2014 3402RL, Sailun S637/Disc Brakes
2015 F350 CC LWB SRW 6.7L PSD FX4
|
|
|
08-01-2018, 12:08 AM
|
#6
|
Montana Master
Join Date: May 2017
Location: new caney
Posts: 1,050
M.O.C. #19873
|
I have the Mor-Ryde manual reel also and it works good. Had the dealer install it before i left the lot. This reels in the cord no matter how cold and stiff the cord is. No need for the reel to be electric on account the manual is super easy and can be done in about 10 secs. Agree the receptacle should be close to the convenience center. Would not need extension cord if located closer to the front or center. This is a issue the RV industry needs to correct.
|
|
|
08-01-2018, 06:42 AM
|
#7
|
Montana Master
Join Date: Dec 2017
Location: Chattanooga
Posts: 664
M.O.C. #20906
|
Has anyone mounted these reels suspended from the basement ceiling to save floor space? Or is it too heavy?
__________________
2019 Montana 3121RL
2017 XLT 350 SCLB DRW 4X4
|
|
|
08-01-2018, 07:19 AM
|
#8
|
Montana Fan
Join Date: Oct 2017
Location: Moultrie
Posts: 250
M.O.C. #20747
|
The manual reels are not heavy but the basement door would make it awkward. I built a full basement slide out and mounted the reel to it facing the rear of the rv. I pull the slide out to the driver side and everything I need is right there. I mounted another reel facing out on the slide for the water hose.
__________________
Frank and Marilyn
2014 3402RL, Sailun S637/Disc Brakes
2015 F350 CC LWB SRW 6.7L PSD FX4
|
|
|
08-01-2018, 08:05 AM
|
#9
|
Montana Fan
Join Date: Nov 2010
Location: Chatsworth
Posts: 470
M.O.C. #10933
|
I have fitted the same cord reel as Montana uses on my 2017 3720. I removed the fender(very easy ) and mounted the unit on the frame just like the factory does. I disconnected the 50 amp. line and reconnected the line to the electric block. This was tricky only because the wire is so stiff. Whole was cut in the fender while off the rig, for the switch , which comes with hook up instructions. The power for the rail required a wire from breaker box to the reel. Works great and looks like it was factory installed.
|
|
|
08-01-2018, 08:34 AM
|
#10
|
Montana Master
Join Date: Dec 2017
Location: Chattanooga
Posts: 664
M.O.C. #20906
|
Quote:
Originally Posted by GAinaMontana
The manual reels are not heavy but the basement door would make it awkward. I built a full basement slide out and mounted the reel to it facing the rear of the rv. I pull the slide out to the driver side and everything I need is right there. I mounted another reel facing out on the slide for the water hose.
|
I looked at the weight of just the reel, but by the time you add the 50A cord, it will have some weight to it. I assume you are talking about the basement door only opening so far due to the gas door shocks?
__________________
2019 Montana 3121RL
2017 XLT 350 SCLB DRW 4X4
|
|
|
08-01-2018, 09:01 AM
|
#11
|
Montana Fan
Join Date: May 2018
Location: Goldbar, WA.
Posts: 168
M.O.C. #21854
|
Quote:
Originally Posted by artfuldodger
I have fitted the same cord reel as Montana uses on my 2017 3720. I removed the fender(very easy ) and mounted the unit on the frame just like the factory does. I disconnected the 50 amp. line and reconnected the line to the electric block. This was tricky only because the wire is so stiff. Whole was cut in the fender while off the rig, for the switch , which comes with hook up instructions. The power for the rail required a wire from breaker box to the reel. Works great and looks like it was factory installed.
|
Nice! Do you have any pics? I haven't looked it up yet, do you happen to have a link to the factory reel?
I may very well settle for the manual cord in the basement, but I'm still pondering doing what artfuldodger did.
__________________
2018 3950BR - MORryde X-Factor, Disc Brakes, 3rd AC, Stacked W/D, Winegard Trav'ler (DTV), 2000w inverter, EMS-HW50C
2022 Ford F-450 Limited Diesel Dually - B&W 25k Hitch
|
|
|
08-01-2018, 10:39 AM
|
#12
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
Quote:
Originally Posted by artfuldodger
I have fitted the same cord reel as Montana uses on my 2017 3720. I removed the fender(very easy ) and mounted the unit on the frame just like the factory does. I disconnected the 50 amp. line and reconnected the line to the electric block. This was tricky only because the wire is so stiff. Whole was cut in the fender while off the rig, for the switch , which comes with hook up instructions. The power for the rail required a wire from breaker box to the reel. Works great and looks like it was factory installed.
|
X2 on the pix please and part numbers if you have them
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
08-01-2018, 12:07 PM
|
#13
|
Montana Fan
Join Date: Nov 2010
Location: Chatsworth
Posts: 470
M.O.C. #10933
|
I haven't any pics during installation and the outside finished look is identical to every monty with this reel. The brand name is " Shoreline Reels" and l believe the part #is CS12D-SR and is manufactured in Clearwater Fla. The switch is MH2021, but I haven't got the part # for the cord access door. Check it out online under Shoreline Reels for prices, shipping,etc. I think Amazon sells them.
|
|
|
08-01-2018, 02:49 PM
|
#14
|
Montana Master
Join Date: Jan 2018
Location: Thornville
Posts: 546
M.O.C. #21110
|
A picture of your FINISHED mod would be great! It will make it easier for me to decide if I want to change the setup I have now.
__________________
Darwin & Carla
2018.5 3701LK Montana
2022 3500HD Denali Duramax SRW
|
|
|
08-02-2018, 05:53 PM
|
#15
|
Montana Fan
Join Date: Nov 2010
Location: Chatsworth
Posts: 470
M.O.C. #10933
|
Okay, I have a few photos of my finished installation and I would gladly post them but I have no clue how to do that.
|
|
|
08-02-2018, 06:05 PM
|
#16
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
Quote:
Originally Posted by CarWin
My thoughts are....The power reel is a waste of money.
I DO have the manual Morryde Cord reel,installs with 4 screws. It also holds my stock 50amp cord, with a little room to spare ,but not enough for an extension cord too. While hand reeling it in,I hold the cord in a shop rag to wipe it off as being stowed, and also allows me to feel for any breaks in the insulation of the cord.
Wouldn't give it up , I really like that add-on !!!
|
Same here had it on both our Montana's great add on
|
|
|
08-03-2018, 11:54 AM
|
#18
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,213
M.O.C. #6433
|
Quote:
Originally Posted by artfuldodger
Okay, I have a few photos of my finished installation and I would gladly post them but I have no clue how to do that.
|
For future reference, if you want to attach a picture, look below the reply box and click on Go Advanced. Then scroll down to Attach Files and click on Manage Attachments.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
08-03-2018, 09:32 PM
|
#19
|
Montana Fan
Join Date: Nov 2010
Location: Chatsworth
Posts: 470
M.O.C. #10933
|
Thanks BBTX! I think I've learned how to post pics. I couldn't figure out how to move a picture from my photos or my gallery to the reply box or new thread box. I can repair or maintain almost anything, but I find tech skills really hard to acquire.
|
|
|
08-03-2018, 09:50 PM
|
#20
|
Montana Fan
Join Date: May 2018
Location: Goldbar, WA.
Posts: 168
M.O.C. #21854
|
Quote:
Originally Posted by artfuldodger
Thanks BBTX! I think I've learned how to post pics. I couldn't figure out how to move a picture from my photos or my gallery to the reply box or new thread box. I can repair or maintain almost anything, but I find tech skills really hard to acquire.
|
Yeah, well, I find the tech stuff easy but every time I need to fix something on my rig it's a steady diet of forum diving, YouTube and a fair bit of dumb luck. I'm not as hopeless as I once was, but it's pretty ugly at times.
Not sure which of us has it worse.
__________________
2018 3950BR - MORryde X-Factor, Disc Brakes, 3rd AC, Stacked W/D, Winegard Trav'ler (DTV), 2000w inverter, EMS-HW50C
2022 Ford F-450 Limited Diesel Dually - B&W 25k Hitch
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|