|
|
07-09-2018, 09:23 PM
|
#1
|
New Member
Join Date: Jul 2018
Location: Parker
Posts: 4
M.O.C. #22166
|
Hitch help
We are purchasing a 2017 Montana 3710FL and will be pulling with short box Ram. Question :
Do I need a slider or will standard hitch work with the Montana? I was told the Cap is molded to accept a regular hitch??
True/Untrue??
Thanks!
|
|
|
07-09-2018, 09:38 PM
|
#2
|
Site Team
Join Date: Sep 2017
Location: Oro Valley
Posts: 4,084
M.O.C. #20477
|
Craig,
Welcome to the forum!
I would recommend a slider. A standard hitch is less expensive but you have a great likelyhood of damage to your truck. You can hit the truck even with a slider but it is less likely. Would recommend an auto slider over a manual one.
__________________
Zack and Donna plus Millie and Ranger
2018 3160RL
"Life is too short to stay indoors, enjoy the ride!"
|
|
|
07-09-2018, 09:54 PM
|
#3
|
Montana Master
Join Date: Nov 2015
Location: Arlington
Posts: 1,523
M.O.C. #18081
|
Welcome to the forum from Washington state. +1 on the slider.
__________________
SOB
2015 Volvo VNL780 D13, iShift, 32k ET air hitch, Idle Free LiFePO4 APU
16.8KWhr LiFePO4, 2.52 kw solar, 10kva Victron split phase
|
|
|
07-09-2018, 10:16 PM
|
#4
|
Montana Master
Join Date: Sep 2017
Location: Tacoma
Posts: 1,567
M.O.C. #20475
|
Welcome to the MOC family from Washington St! Some will say you don't need a slider with the newer front cap's until it to late I have a long box so I cant say but i'v seen the dents in the cab of those short box trucks without a slider. Get a auto slider if you have a shot box truck.
__________________
Bob & Carol Washington St
2017 HC HM352RL 2018 Dodge 3500 laramie CC LB 4x4
Curt Q25 with puck system, Factory air bags
Happy Trails
|
|
|
07-10-2018, 06:19 AM
|
#5
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
Slider if it was my truck.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
07-10-2018, 06:41 AM
|
#6
|
Montana Master
Join Date: Oct 2017
Location: Bee Branch
Posts: 2,620
M.O.C. #20693
|
Slider. My last truck was a short bed with dents on both sides plus a $400 rear glass replacement (learning curve)....
I won’t buy another short bed but I live in the country with plenty of parking and also like the extra room
__________________
James & Irene Wilson
Bee Branch, AR.
2017 Ram 1 ton diesel duallyCrew Cab/Long Bed
2018 Montana High Country 381TH Garage Full of Toys
|
|
|
07-10-2018, 07:35 AM
|
#7
|
New Member
Join Date: Jul 2018
Location: Parker
Posts: 4
M.O.C. #22166
|
Thank you all for your replies. Looks like an Auto Slider is my answer.......
|
|
|
07-10-2018, 07:36 AM
|
#8
|
Montana Master
Join Date: May 2018
Location: livingston,tx
Posts: 569
M.O.C. #21685
|
Welcome to the forum.
|
|
|
07-10-2018, 08:02 AM
|
#9
|
Montana Master
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 3,198
M.O.C. #13740
|
Welcome to the group. Just saw a pickup in the last rv park with a plywood rear window. And yes, he was towing a fifth wheel.
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|
|
|
07-10-2018, 09:08 AM
|
#10
|
Montana Master
Join Date: Mar 2016
Location: Catoosa
Posts: 786
M.O.C. #18384
|
I've been pulling with a short bed with a Reese manual slider since 2005 and have seldom needed to use it, however the few times I did use it I was glad I had it. Remember, it's the unexpected that will get you! One time while waiting to get to a gas pump where I had to act quickly when it emptied, I had to make a tight turn and made slight contact with the cab. I was lucky, as it left just a slight dent and paint scuff that you don't notice unless I point it out. Therefore my advice is to make the investment in a auto slider if you can, if not at least get a manual slider. Check the various rv classifieds or Craigslist if you want to save some money.
|
|
|
07-10-2018, 09:13 AM
|
#11
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Welcome to the forum! We pull with a short bed and originally had a Reese slider. Replaced it with a Pullrite when I got a great deal at the Central Plains Rally. Very nice just to steer and not worry about it.
|
|
|
07-10-2018, 09:26 AM
|
#12
|
New Member
Join Date: Jul 2018
Location: Parker
Posts: 4
M.O.C. #22166
|
Thanks!! Great advice
|
|
|
07-10-2018, 10:31 AM
|
#13
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
Soooo which autoslider did you settle on?
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
07-10-2018, 12:22 PM
|
#14
|
New Member
Join Date: Jul 2018
Location: Parker
Posts: 4
M.O.C. #22166
|
I haven’t yet. Do you have a recommendation ?
|
|
|
07-10-2018, 12:32 PM
|
#15
|
Montana Fan
Join Date: May 2016
Location: celina
Posts: 122
M.O.C. #18604
|
I would recommend the pullrite slider. It really worked great for me on my past 3/4 ton Ford truck. It is fully automatic your just need to lube the rails . Only downside is adding the capture plate on the fifth wheel .
|
|
|
07-10-2018, 01:56 PM
|
#16
|
Montana Master
Join Date: Aug 2009
Location: Grand Rapids
Posts: 1,898
M.O.C. #9561
|
you don't need a slider but just be very careful on your turns.....
|
|
|
07-10-2018, 03:15 PM
|
#17
|
Montana Fan
Join Date: Feb 2015
Location: Ferndale
Posts: 273
M.O.C. #16033
|
Pullrite slider, no remembering to get out and move a lever. It is auto slide.
|
|
|
07-10-2018, 03:25 PM
|
#18
|
Montana Master
Join Date: Apr 2017
Location: 1000 oaks
Posts: 978
M.O.C. #19630
|
I used a Pullrite for two 5th wheels with my short bed RAM. I went to a Reese 5th Airborne Sidewinder hitch pin, which we love, and a Demco Recon hitch.
Pullrite is very heavy, messy, and takes up a lot of room in the bed.
__________________
2011 2955RL Gen-Y Executive Kingpin
2022 GMC 2500HD Duramax/Alison
4X4 Crew Cab/Standard bed.
|
|
|
07-10-2018, 04:51 PM
|
#19
|
Montana Fan
Join Date: Feb 2016
Location: Brookings
Posts: 313
M.O.C. #18275
|
Use a Pullrite! I have one and well worth the money for the piece of mind!!
|
|
|
07-10-2018, 08:45 PM
|
#20
|
Montana Fan
Join Date: Jan 2018
Location: Boone
Posts: 311
M.O.C. #21011
|
I have the Pullrite superslider. And it does it’s job, BUT, I’d save your money and get a real hitch and save your back. Get B&W manual slider. It’s there when you need it. If you go with Pullrite, do your homework. They have some issues too. You will hate it if you try to hook or unhook at any small angle, but it’ll say that in the manual. You have to clean and lube the rails every time you use it, and you have to purchase a special capture plate too. Hitches are like Fords and Chevy’s, people either love or hate them, IMHO. Good luck with your decision. Just do a lot of research. And for me, I love my under mounted rails.
__________________
2018 Montana HC 362RD
2016 Chevrolet 3500 Duramax HD SRW
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|