|
10-11-2015, 10:16 AM
|
#1
|
Montana Master
Join Date: Feb 2005
Location: Sioux Falls
Posts: 729
M.O.C. #3206
|
Replacing the old TV
Our existing tv broke loose and was hanging by some of the wiring when we stopped for the nite- Please share how y'all mounted one of the new thin tvs- The cavity left by the old analog tv presents some problems- Where and how did y'all mount the wall bracket that holds the 32" tv? THANX in advance for all info y'all can share- Don
|
|
|
10-11-2015, 10:36 AM
|
#2
|
Montana Master
Join Date: Aug 2010
Location: Washington Coast
Posts: 2,688
M.O.C. #10696
|
On my old 2004 monty I had the same issue all you have to do is get a Mor-ryde tv mount,this is the one I used http://tweetys.com/tv-mount-slide-out-swivel.aspx and get a 32in flat screen and you are good to go ,the tv will be a little bigger than the hole but no big deal and the bracket locks in place against the hole when traveling
__________________
[
|
|
|
10-11-2015, 12:59 PM
|
#3
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,361
M.O.C. #6433
|
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
10-11-2015, 03:29 PM
|
#4
|
Montana Master
Join Date: Oct 2004
Location: Salem
Posts: 7,670
M.O.C. #2283
|
I had a 2001 2955 RL with a 27 inch tube TV. I put a piece of good 3/4 inch plywood with 3 hinges and 2 latches in its place and mounted the fiat screen to it so I could use the space behind it.
Lynwood
|
|
|
10-12-2015, 02:50 AM
|
#5
|
Montana Master
Join Date: Jan 2006
Location: San Antonio
Posts: 1,308
M.O.C. #5165
|
I replaced both TV's in our 2006 with flat screen HDs. Used MorRyde Television mounts and they have worked out very well. Yes, the space behind the is open but I have to much junk already--don't need to find a place to store more! We are just completing a 100 day trip of about 9000 miles and are very pleased with the MorRyde mounts. I just did not trust the standard wall mount used in residential installations to last long while I was towing.
__________________
F-250 King Ranch Crew Cab 2012, Single Wheel, 6.7 L Diesel, Transfer Flow Internal 50 Gallon Fuel Tank, Upgraded Ford Software for 50 Gallon tank, 2006 3475Rl with Mor-ryde King Pin, 2nd AC, 2nd Battery, Pressure Pro TPMS, Wet Bolt Shackle Kit
|
|
|
10-12-2015, 11:49 AM
|
#6
|
Montana Master
Join Date: Oct 2006
Location: _
Posts: 5,238
M.O.C. #6337
|
Lots of ways to go on this,
ours: 2011
|
|
|
10-13-2015, 04:18 AM
|
#7
|
Montana Master
Join Date: Feb 2006
Location: Denver
Posts: 1,049
M.O.C. #5329
|
Great pics, neat installation, thanks!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|