Slide Awning railing

2Wanderers

Senior Member
Joined
Jan 3, 2010
Posts
184
Location
Littleton
Are the factory installed drip moldings over the slide outs designed to secure an add on lippert awning, or do you need to add another retainer rail? Can you use the drip molding as the retainer rail for the addon slide awning?
 
Last edited:
Not sure what you are asking.. Do you mean can you use the drip moldings for slide toppers?
 
When I did the slide topper on are's the factory drip rails weren't long enough for the toppers and did not make enough angle for water to run off so I add new rails about 2" above them.
 
On or 381 they worked out perfect, made install a breeze.
 

Attachments

  • IMG_4123.jpg
    IMG_4123.jpg
    292 KB · Views: 118
I'm a couple months late responding - sorry. This could be helpful to other DIYers


I'm in the process of installing toppers on our HC. I thought there were awning rails on ours but they ended up being drip rails above each slide. Dometic supplies awning rails, cut to length with each slide topper. They are installed quite easily** with the self drilling screws, Just be sure to inventory each box of parts that comes with each topper - I ended up short 3 bags of screws.



** Easily means standing on a ladder for several hours, first checking proper alignment with the slide as well as where the rail goes height wise.



Then an initial center screw install, next the rail is taken down for some silicone caullk at each hole, then going back up the ladder and refastening that one screw. You then go to one end and ad the rest of the screws to the middle, After that, you start at the other end and do the same thing. Once the rail is up, you go back and clean up that silicone you slobbered on the side wall.



For our four toppers, I installed 110 self tapping screws over a period of about 5 hours. I then installed the 4 sets of topper brackets which are anothe 40 screws that need predrilled holes. Not difficult but time consuming.
 
Maybe because its an option they put the correct rail sizes, for the cost of these things they should come standard. Just make sure you order the correct awning size, you dont want it too much bigger, I think the brackets allow for 3 inches either way & most awning come in 6 inch increments.
 

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top