Schwintek Slide Part?

[TWC84]

I found the attached part on the inside floor just below where the slide comes in and out. It looks like it has sheared off somewhere. I'm thinking it part of the Schwintek slide mechanism, but can't find where it might have come off. It's about 1.5" x 0.25". Again, I found it on the inside when I put the slide out. I've inspected the other side as much as possible (inside and out) but can't find where it might be missing or a similar part on the opposite side. So far, the slide operation seems to be normal. Does anyone recognize this part? Any ideas on inspecting the slide more effectively?

 

[ChuckS]

It’s the gib block

Read this PDF for pictorial of the upper and lower bearing guide block assy and gib block

https://lci-support-doc.s3.amazonaws.com/assemblies/slideouts/ccd-0002715.pdf

 

[ChuckS]

You will need to fix this else you will have slide out issues . Don’t know of yo7 have the standard or inverted style Schwintek slide system

These links will help you identify and umderstsnd

https://lci-support-doc.s3.amazonaws.com/quickreferences/ccd-0002607.pdf

https://lci-support-doc.s3.amazonaws.com/quickreferences/ccd-0002705.pdf

 

[TWC84]

You will need to fix this else you will have slide out issues . Don’t know of yo7 have the standard or inverted style Schwintek slide system

These links will help you identify and umderstsnd

https://lci-support-doc.s3.amazonaws.com/quickreferences/ccd-0002607.pdf

https://lci-support-doc.s3.amazonaws.com/quickreferences/ccd-0002705.pdf

Excellent information! Thank you very much - hopefully I can get it taken care of myself.