Replacing motor for ACCUSLIDE

[Pocketlake1]

We have an electric cable driven slide system. The 12v motor part R25075 seems like it’s straining and thinking of replacing just the motor. Is this simply remove the 2 bolts and replace the motor with no need for any chain adjustment needed needed? I would have it halfway in. The motor is in the middle above the slide for our 2015 HM318RE. Thanks in advance for any insight

 

[TomCat]

If the cables are adjusted correctly, and all you want to do is replace the motor, you can use cable ties through the chain links to mark the position of the chain on the sprocket. Replace the motor, then put the chain back exactly where it was.

 

[Dfb]

I carry a spare motor....

 

[Pocketlake1]

If the cables are adjusted correctly, and all you want to do is replace the motor, you can use cable ties through the chain links to mark the position of the chain on the sprocket. Replace the motor, then put the chain back exactly where it was.

Thanks!