Puck light in my 2020 Montana 3811MS

[A McInerney]

I have a puck light (for lack of the exact name) in our 2020 Montana 2811MS, that started flickering. It is one of 2 in the front of the master bedroom. It has always appeared off color. How do I remove it? And where would I find a replacement? I searched forums, but did not find it.

Thanks in advance!
Tony McInerney

 

[Daryles]

Remove the cover by turning it counterclockwise.
I use a strap wrench.
Unscrew the phillips head retaining screws and it will come loose from the ceiling.
It will have Crimp on wire connectors. If you squeeze them on the long side you might be able to open them enough to pull the wires out so you can reuse them.
You can find replacements on Amazon. Double check the dimensions.

 

[MandK]

What Daryl said. This post reminded me this morning to empty the sawdust out of the few that get sawdust in them every time we move so I took a couple of pictures for you.
I just push up lightly on them with my palm while turning. There are tabs on the plastic lens that will align with the metal mounting plate and they’re off.
The discoloration you mention could be saw dust…ours used to fill up, but almost 4 years in it’s a lot less now.

 

[A McInerney]

Thank you!

 

[RMcNeal]

The discoloration you mention could be saw dust…ours used to fill up, but almost 4 years in it’s a lot less now.

Glad to see I'm not the only one with this problem.

 

[bsdf200]

I have broken 2 of the covers, any idea where to find replacements ?

 

[lajitasgal]

Got an unrelated giggle out of your sawdust removal comment. We purchased our 3121 RL new in 2019. Nearly five years down the road and we *still* find sawdust in odd places, especially kitchen counters & range cooktop.

 

[Sknighto]

5” puck light replacement

I recently replaced one LED puck light in our 2017 Montana 5th wheel.
I found the replacement at etrailer.com .
It was 5” diameter surface mount white Gustafson 277-000341. The cost was just under $30 with tax and shipping.
It’s an easy replacement.

Stan Knighton St. George, Utah

 

[bsdf200]

I was hoping just to replace just the cover the light still works. I can't find just the cover.

 

[Sknighto]

Puck light cover

I have my old cover, make sure of your size. Mine is 5” across. I could drop it in the mail if it would fit your light. We’re located in St George, Ut. Not sure what the postage would be but it doesn’t weigh much.

Stan

 

[bsdf200]

My 5th wheel is in masa, az will not be down there into jan.

 

[jimborokz]

I was hoping just to replace just the cover the light still works. I can't find just the cover.

I found two in a drawer in mine. Guess they expected me to break a couple.