LiTime lithium battery install wiestion

[Flashracer]

I have a question with victron controller. It is showing 14.7 volts. Should I mess with the settings? I did switch the fuse box to lithium. Anything else in settings do I need to do?
Thank you

 

[Greg10yes]

Ideally you should get the battery charge info from LiTime, Then change the charge parameters in the Victron charger to match up.

 

[Creeker]

We have Litime 230AH batteries. Litime states a charging voltage of 14.4
We have our Victron charge controllers set to 14.4V

 

[foldbak]

I have a question with victron controller. It is showing 14.7 volts. Should I mess with the settings? I did switch the fuse box to lithium. Anything else in settings do I need to do?
Thank you

You can change the charge voltage in the Victron app. Make sure it sure set to lithium. Also check the specs on the battery. It will tell you what charge voltage to set it at. Do your batteries have a BMS? What brand?

 

[Flashracer]

You can change the charge voltage in the Victron app. Make sure it sure set to lithium. Also check the specs on the battery. It will tell you what charge voltage to set it at. Do your batteries have a BMS? What brand?

LiTime. It is set to lithium. It is BMS with Bluetooth. I set the Victron to lithium and the parameters are preset.

 

[foldbak]

LiTime. It is set to lithium. It is BMS with Bluetooth. I set the Victron to lithium and the parameters are preset.

Access the battery settings in the Victron app and set the voltage to manufacture specs.