Level Up System Stuck in Auto Level While Hitching

Biggjb

Senior Member
Joined
Oct 31, 2009
Posts
109
Location
Gatineau
Good afternoon MOC members. I am trying to hook up my trailer but my level up system gives me an error message to check a component and it will not allow me to exit the Auto level process. I tried to remove the jacks manually and was able to retract them but the system still wants to level... Does anyone know how to correct this error?
 
Biggjb - you have a 2018 3920FB - basically same rig as mine. I have not had this issue come up...yet.

Have you tried pushing the power button to turn it off?
I use my "auto level" feature to set up camp, but I always select and use "manual" to retract the legs...no magic or special reason...I just do it that way (I do the same on my motorhome).
If you can turn it off and if it will let you scroll thru to "manual" -hit "enter", then "retract" to see if you can get the legs to respond.
 
You can reset the Level UP by cutting power to it. If you don't have a battery disconnect, you can just pull the negative terminal, wait a minute and reinstall it.
 
if resetting it doesn't work give Lippert customer service a call, they are good to deal with.
 
If you can get to the back of the keyboard through the propane door, another way to power cycle the keyboard is to unplug the wire connector and wait 30s.

I had to call Lippert for a same/similar problem and they were very helpful walking me through a detailed troubleshooting sequence checking solenoid clicking and wiring connections. After that, they had me try the above power cycling which worked.
 
Thanks for all the suggests and as I will be closing next I will try these and let everyone know my results...
 

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top