This AI-generated summary may contain inaccuracies. Please refer to the full thread for complete details.
Members said the coach's internal surge protector was likely tripping because the generator was presenting an open ground or lacked a neutral-ground bond when connected through a 30A-to-50A adapter. Several members recommended using a neutral bonding plug in one of the generator's 120V outlets, either purchased or made from a standard three-prong plug by tying neutral and ground together.
The original poster reported that after making the bonding plug, the generator powered the coach...
Members said the coach's internal surge protector was likely tripping because the generator was presenting an open ground or lacked a neutral-ground bond when connected through a 30A-to-50A adapter. Several members recommended using a neutral bonding plug in one of the generator's 120V outlets, either purchased or made from a standard three-prong plug by tying neutral and ground together.
The original poster reported that after making the bonding plug, the generator powered the coach successfully and planned to make a spare. Points of agreement
A neutral bonding plug was the commonly suggested fix.
Members noted it can be bought cheaply or made easily if wired correctly.
Bottom line
The discussion reached a practical solution that worked for the original poster.
I have a 2022 3121 RL and I am trying to use a Westinghouse iGen5000DFC generator to power my coach while boondocking. The igen5000DFC has a 30 amp RV receptacle on it. I use a 30 amp to 50 amp adapter and plug into the coaches 50 amp cord. When I do this, the internal surge protector trips. Has anyone experienced this. If so, how do you get the generator to power the coach? I have also tried the 110v plugs that are supposed to merge the ground and neutral lines to correct this and it has not worked. Any inputs would be appreciated.
A grounding plug is easy to make. All it is is a three pronged plug with the neutral and the ground wire together. If you already have one it’s a 10 minute job. Just be sure you wire the neutral and the ground together and not the ground and 120 together.
Lynwood