Blinking led kitchen lights

[Rnjmurray]

I have 2019 Montana legacy with the in command system. Every now and then went i turn on the kitchen lights they will either blink or come on dim. Shut them off and turn them back on and they’re fine. If you push the keypad button to turn them all on kitchen hallway living room they all come except the kitchen either is delayed a second or two or come on blinking or dim then brighten up . Just the kitchen lights. Any thoughts out there.

 

[Mikendebbie]

I cured my hesitant/blinking/blinky dining room/kitchen lights by swapping relays on the InCommand main board in the basement. I would turn on the lights by "touch button" on the INCommand screen. The lights would blink-blink-blink and then come on.

In the basement, probably on the passenger side - is the InCommand main board (BCM?). Take the clear plastic cover off and you will see a bunch of black/gray relays, maybe 1"x1" square. Look in your INCommand owners information for the diagram of numbered circuits. Maybe living room lights are circuit #3...so locate relay #3 and unplug it. All these relays are identical - so pick another relay - say circuit #7...unplug it and put it in #3 plug and the other one goes in #7. Go inside and see if it cured the blinky problem.