Mikelff

I If your batteries were dead, they are toast, especially if they sat dead for several days. Unless they are Lithium batteries, you...

Get that PDI checklist off the forum. Start at the front and check everything that is mechanical, and fit and finish. Extend and retract...

I drive 65-67 unless I need to pass at 70 mph max. That’s hurricane force winds on your rig. I had some idiot pass me once with a good...

Leave the vents open. You still need air circulation back there.

Curt air ride and Lippert air ride are very similar designs. Most models you can hardly tell the difference. That said, I have a Lippert...

I have Carlisle tires on my rig now. Too new to have any first hand experience. I did a lot of research on them and all were good...

I would recommend putting the slides in when not in use. It protects the slides in case of storms or other “Murphy” events when you are...

I sealed the smaller holes with copper wool. It doesn’t rust and mice hate trying to chew through it. It’s easy to work with and stuff...

As others have said, you need to figure out what you want out of a generator. If it’s to run a couple of air conditioners and other ac...

I have had 2 sets of Sailun and had great experience with both. Sailun did have a recall a few years back but for a narrow production...

I second DutchmanSport. When I first got my rig I tried staying hooked up. Doesn’t work that well and can cause problems with the...

H /16 ply tires are a bit stout for your rig. You could easily go with G rated 14 ply, but H will work. You should inflate to at least...

IMO, you might be better off with 2 WEN dual fuel 3500. Less weight to shlep around, and option to use just one generator if that’s all...

For those of you considering Carlisle tires. A few things about these tires. Make sure they are labeled “made in USA”. Their website...

I agree with chunker. I-20 is better route around Dallas, and on to Georgia. At all costs, avoid going through Baton Rouge, LA on I-10...