3402RL Contol Panel cover

[martyperu]

We have a 2013 3402RL and like everything about it. I noticed on the 2014 pictures they have put a nice cover/door around the control panel. I think this finishes of the décor instead of having the black panel visible. Would anyone know if I could purchase this frame work and install in myself in my 2013? Thanks

[DQDick]

I would imagine it's like many of the changes we've made to our rig. See it at the Rally, wait till it's out in the field, go to a Montana dealer and order the part just like you would any replacement. You might have to change the wires over to new switches but it sounds like it wouldn't be a big deal. They don't card you at Montana dealers to make sure you have that model rig so it's easy.

[mail2us]

Marty,

click on this http://www.montanaowners.com/forums/...ass,frame,over

CaptainJoe's thread on this subject includes the part numbers and size you can order thru your dealer. My understanding is you cannot order directly from Keystone. Good luck.

[bethandkevin]

We liked the cover as well. Thing is, it was introduced with the new cherry décor (correct me if I'm wrong). Our 2013 is a Hickory Edition. Sure would like to add it to ours.

[Jaru93]

I just bought a 2013, 3402RL and had the dealer order a door for me which I installed myself. It takes a little maneuvering to get the old frame off and put the new frame with door on, but not too hard. There are a lot of wires tied into the switches on the panel, so just take your time and be careful. Cost of part is about $125