Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > GENERAL DISCUSSIONS > Tow Vehicles & Towing
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 08-02-2004, 12:46 PM   #1
Montana_654
New Member
 
Join Date: Nov 2003
Location: Tybee Island
Posts: 4
M.O.C. #654
B&W Hitch

Has anyone installed one of these hitches?

It got my attention because is is a two part hitch that allows the part that is in the truck bed to be removed easily and leaves a flat truck bed with no hitch rails to contend with. (The rails are under the truck bed bolted to the truck frame)

See the hitch here: http://tandrtrailer.com/hitches/index.php
Montana_654 is offline   Reply With Quote
Old 08-02-2004, 01:08 PM   #2
vickster
Montana Master
 
Join Date: Mar 2004
Location: Racine
Posts: 809
M.O.C. #1165
jerry525 - We do not have one of these B&W hitches. Hubby had a Draw-Tite Signature Series hitch installed in our truck bed. There are no rails in the truck bed, they are all under the bed. We also, did not want to contend with rails in the truck bed.
vickster is offline   Reply With Quote
Old 08-19-2004, 04:51 AM   #3
w4nfr
Seasoned Camper
 
Join Date: Nov 2003
Location: Livingston
Posts: 66
M.O.C. #646
I have the B & W hitch and love it! Purchased and had it installed at "See-Mor" Custom Truck in Ruckersville Virginia. They did a great job and it looks fantastic. The entire hitch can be removed when you need the entire truck bed. I especially like the gimbal mount for towing over uneven ground. It is very quiet due to the use of rubber on some of the moving parts plus there is a small shock absorber for dampening. I use one of the teflon disks on my hitch pin. One of the best features is the large heavy duty jaws that secure the pin and the positive way the hitch is locked! Very easy to hookup too.
w4nfr is offline   Reply With Quote
Old 08-19-2004, 12:33 PM   #4
lightningjack11
Montana Master
 
Join Date: Dec 2002
Location: Spring Hill
Posts: 2,725
M.O.C. #59
Jerry,

I have a Draw-Tite slider hitch and it stays in the garage most of the time so I have full use of my truck. When I am ready I lift it into the truck and slip in 4 pins and I am ready to go. I am sure Reese is the same. No need to leave the hitch in the truck.
lightningjack11 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
B&w companion hitch or new ultimate hitch okierver Tow Vehicles & Towing 11 07-22-2018 07:21 PM
Reese hitch - out and B&W hitch - in dpam Additions & Improvements 6 05-27-2015 01:13 PM
B&W hitch head on a Reese Slider hitch dpam General Discussions about our Montanas 8 10-28-2014 02:43 PM
Hitch in SLC flyerone Tow Vehicles & Towing 4 06-14-2007 04:52 PM
Gooseneck hitch vs. Regular Fifth wheel hitch Montana_2020 Tow Vehicles & Towing 4 11-11-2005 07:22 AM

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 09:41 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
×