Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > GENERAL DISCUSSIONS > General Discussions about our Montanas
Click Here to Login

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-17-2019, 08:30 PM   #1
jaybird
Montana Fan
 
Join Date: Sep 2006
Location: Kent
Posts: 294
M.O.C. #6300
Wheel bearing grease for beginners

How the heck does a non mechanical guy grease his bearings. My Monty is 5yrs old? Is it needed?
 
jaybird is offline   Reply With Quote
Old 09-17-2019, 08:38 PM   #2
jaybird
Montana Fan
 
Join Date: Sep 2006
Location: Kent
Posts: 294
M.O.C. #6300
Ok. Just watched Utube video. Ain't gonna happen by me. How often do we need to do this to our 5er. I figure I've traveled 5k in my 2014 so far
jaybird is offline   Reply With Quote
Old 09-17-2019, 10:23 PM   #3
rohrmann
Montana Master
 
rohrmann's Avatar
 
Join Date: Oct 2012
Location: Box Elder
Posts: 4,676
M.O.C. #12947
This has been discussed on other threads, but the bearing service is just a small part of the procedure, the other major part is inspecting the brakes, which should be done at least annually, and of course, the bearings are removed during the inspection, so they might as well be checked and packed with fresh grease. All this can not be done by squirting grease into the zerk fittings. Dexter recommends this service should be done annually or 12,000 miles, but really, with low mileage, it can probably be done every two years, but it is your call and risk if something is wrong with your brakes between this long service interval.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
rohrmann is offline   Reply With Quote
Old 09-18-2019, 04:40 AM   #4
mazboy
Montana Master
 
Join Date: Aug 2009
Location: Grand Rapids
Posts: 1,896
M.O.C. #9561
you hire someone
mazboy is offline   Reply With Quote
Old 09-18-2019, 09:40 AM   #5
jaybird
Montana Fan
 
Join Date: Sep 2006
Location: Kent
Posts: 294
M.O.C. #6300
Can a tire store like Les Schwab do the job or must I go to a RV outlet (no RV store near me)
jaybird is offline   Reply With Quote
Old 09-18-2019, 07:00 PM   #6
Whitewolf
Established Member
 
Whitewolf's Avatar
 
Join Date: Jul 2014
Location: Brimley
Posts: 45
M.O.C. #14498
Any good vehicle prepare shop should be able to grease bearings. But I believe an RV shop will be more familiar with electric brake service or replacement.
__________________
'21 CTD Ram 3500 SRW * Sinister Bypass oil Filter
'14 Montana High Country 305RL* Reese Goosebox * Morryde HD shackle kit * JoyRider shocks * Hardwired EMS-HW50C
Whitewolf is offline   Reply With Quote
Old 09-18-2019, 07:14 PM   #7
rmorris
Established Member
 
Join Date: May 2018
Location: Rochester Hills
Posts: 15
M.O.C. #21837
Wheel bearing

The Dexter rep at the rally recommended contacting Dexter and they will give you a Dexter approved repair shop in your area
rmorris is offline   Reply With Quote
Old 09-19-2019, 08:26 AM   #8
ChuckS
Montana Master
 
Join Date: Dec 2017
Location: Mountain Home
Posts: 831
M.O.C. #20949
Honestly removing wheels and hubs and taking out a seal and removing bearings and cleaning , inspecting , greasing and installing new rear seal is quite easy.

UTube videos can guide you thru the procedure. Wheel bearings and brakes on a fifth wheel, along with proper suspension lube are some of the most neglected items that can cause you real grief

An annual inspect and lube are paramount toward your safe journeys down the road. If you can’t do it yourself any trailer shop , horse trailer place , and some tire shops can do this simple task.

If you don’t have the mechanical skill set to do it yourself or are physically unable then find a place and properly maintain your fifth wheel. You will be safe and so will everyone driving along with you
ChuckS is offline   Reply With Quote
Old 09-19-2019, 01:38 PM   #9
Texan
Montana Master
 
Join Date: May 2017
Location: new caney
Posts: 1,050
M.O.C. #19873
The hardest part of the job is handling the G-rated tires. If you have a impact and 6pt leveling then the job is fairly easy. It takes me about 4 hours start to finish for all 4 wheels including taking out and putting up all the tools. As has been said many times on this forum you need to inspect your brakes along with packing your bearings annually. My bearings always look good from one year to the next but I had one brake pad that had worn almost to the metal and if I had waited till after my 4,000 mile trip I would be replacing a rotor along with the pads. Most people have a hard time with the word INSPECT but it is just as important as packing your bearings.
Texan is offline   Reply With Quote
Old 09-20-2019, 08:18 AM   #10
Slow Hand
Montana Fan
 
Join Date: May 2015
Location: Livermore
Posts: 492
M.O.C. #17391
There is a toof for the home mechanic. I dont have one I do it the old school way
Here is the tool
https://www.oreillyauto.com/detail/b.../4414128?pos=2
Slow Hand is offline   Reply With Quote
Old 09-20-2019, 11:57 AM   #11
masterdrago
Montana Master
 
masterdrago's Avatar
 
Join Date: Sep 2017
Location: Willis
Posts: 896
M.O.C. #20587
So.... which grease? Racing or automotive quality?


Allstar ALL78240 Timkin Brand Premium Red Type Wheel Bearing Grease 14 oz. Cartridge


or the higher priced



Allstar ALL78242 Timken Brand High-Temp Synthetic Racing Type Wheel Bearing Grease 14 oz. Cartridge



for twice the price?
__________________
2018 Montana 3791RD (SOLD)
2017 Ram 3500 DRW 6.7 Cummins Aisin, B&W RVK3600 (SOLD)
masterdrago is offline   Reply With Quote
Old 09-20-2019, 12:06 PM   #12
masterdrago
Montana Master
 
masterdrago's Avatar
 
Join Date: Sep 2017
Location: Willis
Posts: 896
M.O.C. #20587
This stuff looks a lot cheaper and higher temp....


Valvoline SynPower Synthetic Automotive Grease - 14.1oz (VV985)
__________________
2018 Montana 3791RD (SOLD)
2017 Ram 3500 DRW 6.7 Cummins Aisin, B&W RVK3600 (SOLD)
masterdrago is offline   Reply With Quote
Old 09-20-2019, 12:28 PM   #13
masterdrago
Montana Master
 
masterdrago's Avatar
 
Join Date: Sep 2017
Location: Willis
Posts: 896
M.O.C. #20587
Looking at grease and the recommendations at Dexter and ETrailer, most any and all wheel bearing grease looks to be simply fine. Everyone makes it with their brand on it. I saw somewhere that disc brakes require something a bit better but not sure why. Heat? I just love this name -- Royal Purple 01312 NLGI No. 2 High Performance Multi-Purpose Synthetic Ultra Performance Grease. Does the same thing that all of it does. If we buy the racing Timkin, are we paying for the name or real extra protection? And what is a ten spot difference if we really get extra protection?

  • Significantly increases bearing life
  • Bearings run smoother cooler and quieter
  • Satisfies a wide range of grease requirements
  • Outstanding rust/corrosion protection
  • Extreme pressure capabilities
__________________
2018 Montana 3791RD (SOLD)
2017 Ram 3500 DRW 6.7 Cummins Aisin, B&W RVK3600 (SOLD)
masterdrago is offline   Reply With Quote
Old 09-20-2019, 04:26 PM   #14
Mtncrash1
Montana Fan
 
Join Date: Apr 2018
Location: Omaha
Posts: 143
M.O.C. #21598
Ok dumb question only because I haven’t actually given it the college try yet. How do you get the center hubcaps off.
__________________

2017 HC 345RL
2015 F-250
Mtncrash1 is offline   Reply With Quote
Old 09-20-2019, 06:07 PM   #15
mhs4771
Montana Master
 
mhs4771's Avatar
 
Join Date: Dec 2009
Location: Sebring
Posts: 3,657
M.O.C. #9969
If you're referring to the chrome center cap, you have to remove the wheel as they are mounted thru the center from the back side.
__________________
Michelle & Ann
2018 Chevy 3500HD High Country DRW 4X4 Crew Cab w/Duramax/Allison, Formally 2010 Montana 2955RL, Now Loaded 2016 SOB, Mor/ryde IS, Disc Brakes & Pin Box, Comfort Ride Hitch, Sailun 17.5 Tires.
mhs4771 is offline   Reply With Quote
Old 09-20-2019, 09:55 PM   #16
Mtncrash1
Montana Fan
 
Join Date: Apr 2018
Location: Omaha
Posts: 143
M.O.C. #21598
Quote:
Originally Posted by mhs4771 View Post
If you're referring to the chrome center cap, you have to remove the wheel as they are mounted thru the center from the back side.
Thanks. I thought they were supposed to be ez- lube but I guess not.
__________________

2017 HC 345RL
2015 F-250
Mtncrash1 is offline   Reply With Quote
Old 09-21-2019, 04:28 AM   #17
beeje
Montana Master
 
beeje's Avatar
 
Join Date: Oct 2015
Location: westminster md
Posts: 2,318
M.O.C. #17894
If they are easy lube there should be a removable plastic cap in the center of the chrome center cap. Once you remove it you should see a black rubber plug in there. Pry that out to reveal the grease zerk to lube the bearings. They are best lubed with the wheel off the ground and spinning while being lubed. It takes quite a bit of grease to force the old grease out. Possibly a 1/2 tube or more. Some have had issues with grease getting by the seal and do not use that feature. If done correctly you should not have an issue.

I pump 30-40 pumps into each wheel every season. IMHO inspecting/repacking the bearings every year is a waste of time if you keep them lubed up properly with the ez lube system. I have NEVER removed and inspected the bearings of the 3 trailers I have owned over the last 15 years and have never had a problem. All 3 had the ez lube system.

I use Mobil 1 red synthetic grease.
__________________
2018 Chevy 3500 LTZ Dually Diesel 4x4 CCLB
2011 Montana 3455 SA. 6 point level up. Disc brakes. Curt Q24 Hitch. 5 step glow steps
Progressive EMS. Valterra tank valves. Sailun G637 tires. ARP fridge control. All led lighting. Mor Ryde IS
beeje is offline   Reply With Quote
Old 09-21-2019, 07:23 AM   #18
Slow Hand
Montana Fan
 
Join Date: May 2015
Location: Livermore
Posts: 492
M.O.C. #17391
I just use a high temp disk brake grease even though I have drum brakes. Nothing special just stay lube I believe. No need to spend $$$ on grease. It's just grease. I don't use the easy lube on my trailer. No reason to fill the hub with that much grease. I only grease mine every 2 years. If you do a good job of filling the bearing with clean grease than 2 years is fine. How many times have you greased the bearings in your car or truck?
Slow Hand is offline   Reply With Quote
Old 09-21-2019, 12:57 PM   #19
masterdrago
Montana Master
 
masterdrago's Avatar
 
Join Date: Sep 2017
Location: Willis
Posts: 896
M.O.C. #20587
Quote:
Originally Posted by Slow Hand View Post
I just use a high temp disk brake grease even though I have drum brakes. Nothing special just stay lube I believe. No need to spend $$$ on grease. It's just grease. I don't use the easy lube on my trailer. No reason to fill the hub with that much grease. I only grease mine every 2 years. If you do a good job of filling the bearing with clean grease than 2 years is fine. How many times have you greased the bearings in your car or truck?
At least 4x the load per wheel
__________________
2018 Montana 3791RD (SOLD)
2017 Ram 3500 DRW 6.7 Cummins Aisin, B&W RVK3600 (SOLD)
masterdrago is offline   Reply With Quote
Old 09-22-2019, 05:56 PM   #20
DCHuts
Established Member
 
Join Date: Aug 2018
Location: Hansville
Posts: 27
M.O.C. #22396
wheel bearing grease

jaybird, STOP, take your trailer to Torklift on Central in Kent.
They are the BEST place for service, accessories and suspension work. I have used them for 20 + years. Les Schwab will do it but let them handle tires which they do best.
DCHuts is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 11:04 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.