Originally Posted by RipNC
Look on the driver's side of the basement ceiling (where the inverter was mounted in our rig) and you will probably see a pair of Molex connectors (see photo) that come aparte to wire in an inverter. That romex wire running thru that connector should be feeding those orange dot outlets. You would need to add an inverter.
On the drivers side basement ceiling, I only have a small box that I believe is part of the hydraulic system. It's tucked right against the wall on the front side of the coach. Other than that, I don't have any wires with molex connectors. As you can see, this is where my frustration lies because I'm trying to understand how this would work.
I know when I'm unplugged from shore power right now, my little sticker outlets don't work. Maybe I'll reach out to FutureSales and see if they can explain it. I was (really wasn't) shocked my service center couldn't explain how this "solar prep" is supposed to work.