|
|
01-13-2021, 02:45 PM
|
#21
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,321
M.O.C. #17894
|
Quote:
Originally Posted by twindman
Ah,yes, but can you get a dually long bed into your garage? I can (and do for 7-8 months a year).
|
I can easily get it in my 40 by 42 pole building but it lives outside anyway. I'm in there doing something all the time so I'd have to continually move it out of the way.
|
|
|
01-13-2021, 03:00 PM
|
#22
|
Montana Master
Join Date: Feb 2008
Location: woodstock
Posts: 545
M.O.C. #8174
|
The tailgate will be up on turns and while hooking up then close! You will need a slide hutch with the short bed! Long bed and you do. It need a slide.
Hopes this helps.I have the f350 long bed
Ed
__________________
Ed
Montana Master
Woodstock Ga
2020 3931 FB Legacy
|
|
|
01-17-2021, 01:12 PM
|
#23
|
Established Member
Join Date: Aug 2020
Location: Quincy
Posts: 22
M.O.C. #26815
|
I have a 2021 Montana 3761FL and a 2018 F350 crew cab shortbox with Pullrite Super Glide hitch and I don’t have any problems. Hope this helps.
Darrel
|
|
|
01-17-2021, 01:33 PM
|
#24
|
Montana Fan
Join Date: Apr 2017
Location: Indio
Posts: 103
M.O.C. #19705
|
Something to consider for your "peace-of-mind"...purchase a "flow-through" 5vr tailgate for your TV...put that OEM tailgate into cold storage...you'll never worry about tailgate contact with your 5vr...and you'll never center punch the top of the OEM tailgate 'cause you "forgot" to drop it.
__________________
Richard & Judy Blackwell
Indio, Ca.
2014 F350 DRW 4x4 Diesel
2013 3402RL
|
|
|
01-17-2021, 02:12 PM
|
#25
|
Established Member
Join Date: Dec 2020
Location: Byron Center
Posts: 17
M.O.C. #27708
|
We just bought a new 3121 before we left for Arizona for the winter. Pulling it with our 2012 F350 , 6.7 diesel with our Reese 16k hitch. Just pay attention when backing up and no problems.
|
|
|
01-17-2021, 04:56 PM
|
#26
|
Established Member
Join Date: Aug 2020
Location: Carthage
Posts: 16
M.O.C. #26958
|
Quote:
Originally Posted by Gubs
Just purchased the truck to pull our new Montana 3121RL. We purchased a 2019 F-350 4x4 super duty crew cab diesel short bed. Now worried about if the hitch and the tool box are all going to fit in the truck or not. Also worried about the backing up, hitching up with tailgate down and sharp turns. My hitch is a 16K Husky slider which was taken out of my old truck and being put into my new truck. I think the bed in the new truck is shorter than in the old truck. I know stupid time to worry about all these sort of things, should have done that before buying the truck and the camper. Maybe should have bought a camper with the different front end cap, maybe bought the long bed instead of the short bed. Ya I know, but that is now water under the bridge. I now have to somehow make this situation work. Way to much money already spent to start all over!!! Anyhow, wants, desires and looks before functionality has always been my major downfall!!! Suggestions appreciated, advise ok, telling me just how stupid I was....NOT needed, already figured that out with some assistance from the wife
|
We have the same 3122RL and have a 2019 F250 and have a Pulllite 2600. I never pull or reverse with the tailgate down. The only time I let it down is for hookup and disconnect. Would not recommend turning or backing with a tool box.
|
|
|
01-19-2021, 06:01 AM
|
#27
|
New Member
Join Date: Jun 2017
Location: Waterloo
Posts: 3
M.O.C. #19961
|
short vs long
in years of my towing fifth wheel trailer, I would never tow with a short bed.
believe it or not the extra length lengthens the wheelbase a bit and it takes a lot of the top out of the ride.
and you don't need to worry about sliding the fifth wheel ever!
|
|
|
01-19-2021, 08:09 AM
|
#28
|
Montana Fan
Join Date: Dec 2020
Location: STUARTS DRAFT, VA
Posts: 140
M.O.C. #27830
|
You should be fine. Just go slow with an outside observer each time you maneuver.
__________________
John and Carrie
2021 Montana 3121RL Legacy
2020 F-250 Lariat 4X4 Short 3.55
|
|
|
01-19-2021, 08:46 AM
|
#29
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,321
M.O.C. #17894
|
Quote:
Originally Posted by Krisbc1
in years of my towing fifth wheel trailer, I would never tow with a short bed.
believe it or not the extra length lengthens the wheelbase a bit and it takes a lot of the top out of the ride.
and you don't need to worry about sliding the fifth wheel ever!
|
I completely agree but we are in the minority. The short bed users have a million reasons for not wanting a long bed.
|
|
|
01-19-2021, 10:57 AM
|
#30
|
Montana Master
Join Date: Jul 2020
Location: Battleford
Posts: 627
M.O.C. #26690
|
Quote:
Originally Posted by beeje
I completely agree but we are in the minority. The short bed users have a million reasons for not wanting a long bed.
|
To me, it's a bit like the debate on sailing forums about what size of sailboat to buy. My experience with sailing is that on the water you want the biggest boat you can, as they are so much more comfortable and safer when wind and waves get up. But, when not actually sailing, you want the smallest boat possible for maneuvering, docking, launching, etc. And, statistically, smaller boats get more use than larger ones.
How does that apply?
For when you are actually hooked up and towing, there is no doubt that a long bed dually has significant advantages.
For every other time you drive when not towing, that same long bed dually has significant disadvantages.
IOW, when loaded, a dually is a better tool for the job, but empty, the SRW short box is the better tool. Most owners drive far more miles empty so not hard to understand the popularity of their choices.
Brad
__________________
2021 Montana 3790RD, Legacy, Super Solar Flex
2020 RAM 3500 Limited, HO
|
|
|
01-19-2021, 02:42 PM
|
#31
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,321
M.O.C. #17894
|
Quote:
Originally Posted by kowbra
To me, it's a bit like the debate on sailing forums about what size of sailboat to buy. My experience with sailing is that on the water you want the biggest boat you can, as they are so much more comfortable and safer when wind and waves get up. But, when not actually sailing, you want the smallest boat possible for maneuvering, docking, launching, etc. And, statistically, smaller boats get more use than larger ones.
How does that apply?
For when you are actually hooked up and towing, there is no doubt that a long bed dually has significant advantages.
For every other time you drive when not towing, that same long bed dually has significant disadvantages.
IOW, when loaded, a dually is a better tool for the job, but empty, the SRW short box is the better tool. Most owners drive far more miles empty so not hard to understand the popularity of their choices.
Brad
|
I can't disagree with anything you stated. However in my situation my truck hardly ever moves without the camper hooked to it.
My only question for somebody in the opposite position would be would you rather be safer while towing your rig with a daully, or have easier maneuverability while not Towing with a SWR truck.?
|
|
|
01-19-2021, 03:04 PM
|
#32
|
Montana Master
Join Date: Jul 2020
Location: Battleford
Posts: 627
M.O.C. #26690
|
Quote:
Originally Posted by beeje
I can't disagree with anything you stated. However in my situation my truck hardly ever moves without the camper hooked to it.
My only question for somebody in the opposite position would be would you rather be safer while towing your rig with a daully, or have easier maneuverability while not Towing with a SWR truck.?
|
I think the challenge is it's not black and white - we are not comparing safe with unsafe. IOW, it is not unsafe to tow with an SRW truck that meets the numbers.
As to your question of "safer"? That is where it's subjective and up to each one to decide. The guys with the MDT's will say they are safer than the dually pickup guys. And, there are a few on this forum who drive HDT's and would say they are really the ones that are "safer" than the other 98% of us here; and they would be correct. So, dually drivers can't lay sole claim to "safer" in this discussion.
I still maintain that the choice is about finding the best tool for the job, but it gets murky when there are multiple jobs to be done and only one truck to do it with!
Brad
__________________
2021 Montana 3790RD, Legacy, Super Solar Flex
2020 RAM 3500 Limited, HO
|
|
|
01-19-2021, 03:36 PM
|
#33
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,321
M.O.C. #17894
|
I agree, as long as you are within ALL of your numbers all should be good, legally
|
|
|
01-20-2021, 05:22 AM
|
#34
|
Montana Master
Join Date: Jan 2018
Location: Northville, NY
Posts: 807
M.O.C. #21158
|
Quote:
Originally Posted by Gubs
1st of all, tried the glass of wine, it didn't help much so I had another and then another, that worked!!!
Anyhow, my tool box fits inside the bed, nothing above the railings so that sounds like it will not be a problem if the hitch fits without hitting the tool box. Sounds like I just need to be extra careful and deploy the slider prior to backing into tight spots.
Thanks for all the advise and suggestions!!!
|
Same truck in a 2017 and no problems. I have a B&W Companion slider. About the only time I use the slide is when I hook up to give me more room for the tailgate and access to the front compartment. I don't do 90 degree turns to save the axles but I have done some pretty good u-turns with no issue. The nose on these new 5er's really made a difference.
If the toolbox is below the rails you should be all right. I have an auxiliary fuel tank that fits nicely in front of the hitch. It's 20" wide and I have maybe 2-3 inches to spare. As long as your tool box fits between the hitch base and the front of the box you should be good to go.
Sleep well and enjoy the new combo.
__________________
Jim B
2017 Lariat F-350 FX4, CC, SB, 6.7 PSD 4WD
2018 MONTY 3731FL, at our private winter site in GA
|
|
|
01-20-2021, 01:36 PM
|
#35
|
Established Member
Join Date: Sep 2020
Location: Hurricane
Posts: 21
M.O.C. #27141
|
We have 2018 Ram SB have a bed height box from HD. We had to cut some of the front off the rails in order to get it to fit with the tool box-we have a Pull right slider. It has been great. No problems turning or backing into some pretty tight spots. I have the original tail gate, get square with the 5er put tailgate down hook up close the tail gate and you will be fine- just make sure your gate is down when you unhook :-)
|
|
|
01-25-2021, 09:53 AM
|
#36
|
Montana Master
Join Date: Jan 2009
Location: Centerville
Posts: 1,352
M.O.C. #9051
|
Quote:
Originally Posted by beeje
I completely agree but we are in the minority. The short bed users have a million reasons for not wanting a long bed.
|
I am far from having a million reasons ,just two, don't need or like a long bed truck . Have had more long bed trucks then short beds . Just will never own another long bed .
|
|
|
01-26-2021, 04:10 PM
|
#37
|
Montana Master
Join Date: Apr 2006
Location: Mesa az
Posts: 2,962
M.O.C. #5651
|
Quote:
Originally Posted by beeje
I can easily get it in my 40 by 42 pole building but it lives outside anyway. I'm in there doing something all the time so I'd have to continually move it out of the way.
|
For some reason, I can't figure out how to get a 40x42 shed onto my 70x100 lot!!
You are lucky to have that lot to work with - wish I did.
__________________
Tom and Gail
2013 Mountaineer 362
2012 Silverado 2500
|
|
|
02-07-2021, 08:04 AM
|
#38
|
Montana Master
Join Date: Mar 2015
Location: Gardnerville
Posts: 1,257
M.O.C. #17163
|
Get one of the auto sliders and get some sleep..
|
|
|
02-07-2021, 09:17 AM
|
#39
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
Our 08 F-350 LB,CC, Dual wheel drive, diesel has never been in a garage.
|
|
|
02-07-2021, 10:00 AM
|
#40
|
Montana Master
Join Date: Mar 2015
Location: Gardnerville
Posts: 1,257
M.O.C. #17163
|
Depends on the trailer size..
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|