Quote:
Originally Posted by ChuckS
Depending on what zone this AC is mounted to the blue wires would be for the furnace control ( Zone 1 ) and yellow wires are load shed ( if used ) and red/black are 12 vdc (+/-)
Your aren’t using load shed so those should be taped up.. if your furance is working tape the two blue wires up.
Also cap the red/ black ends because if this is the zone 2 AC unit it is getting 12 VDC across the telephone cable (red/black) wires on telephone cable plug.l
See image of wire diagram
|
Thank you for your reply. It is zone 2, I got some help from a FB group that explained the same thing to me. Thank you so much. I trimmed them back and capped all them off.