Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > GENERAL DISCUSSIONS > General Discussions about our Montanas
Click Here to Login

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 11-05-2020, 07:05 AM   #1
cosninocanines
Established Member
 
Join Date: Feb 2009
Location: Flagstaff
Posts: 11
M.O.C. #9137
OEM Parts and accessories

I finally have my own Montana 3121 rl purchased used and I'm missing a few things. I would like to find the Keystone/Montana parts to restore some of the missing items. Piddley stuff but ...
1. Waste basket for the slide out cabinet in the kitchen. I'm not having much success with finding a can that will fit the cutout. I can cut the lid or change the slide out but was hoping I could find the can that fits.
2. Mattress cover. The old one is not up to my standards and I would like to replace it however I can't seem to find a complete cover all sides including the bottom. Plenty of covers out there just no bottoms and without the bottom the mattress foam does not slide very well. Bed making is a huge hassle.

Thanks in advance for any help!
 
cosninocanines is offline   Reply With Quote
Old 11-05-2020, 07:49 AM   #2
DQDick
Site Team
 
DQDick's Avatar
 
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
Not sure about the mattress cover, most of us have gone to home mattresses and so normal covers work. For OEM parts you can use trekwood.com For the most part they will have them, but it will be pricey.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
DQDick is offline   Reply With Quote
Old 11-05-2020, 12:08 PM   #3
Fish
Montana Fan
 
Join Date: Jul 2018
Location: Marion
Posts: 234
M.O.C. #22281
Dollar General Store.
__________________
2019 Montana High Country 384BR
2018 Ram cclb 4x4 6.7 cummins/aisin dually
Fish is offline   Reply With Quote
Old 11-05-2020, 12:27 PM   #4
R.S.O'Donnell
Montana Master
 
Join Date: Feb 2020
Location: USA
Posts: 607
M.O.C. #25842
Trash can in our 3121rl is a Sterilte 1052. I bought two extras at Walmart right after we got our rig just in case they go NLA at some future date.

When I first went looking I found them online for stupid money. They were not expensive at all at our local Walmart. I think under $5.00.

http://www.sterilite.com/SelectProdu...=205&section=3

R.S.O'Donnell is offline   Reply With Quote
Old 11-05-2020, 08:25 PM   #5
Jeff n Susan
Montana Fan
 
Jeff n Susan's Avatar
 
Join Date: Jan 2020
Location: Hilliards
Posts: 237
M.O.C. #25636
As far as the mattress sliding to make the bed, lay a flat sheet on top of the plywood frame, directly below the mattress. This lets the mattress slide around a bit easier for making it in the mornings.
__________________
2020 MHC 330RL
2021 F350 DRW 6.7 Powerstroke
Retired and Rollin'!
Jeff n Susan is offline   Reply With Quote
Old 11-05-2020, 10:38 PM   #6
Rick n Kelly
Established Member
 
Join Date: Sep 2019
Location: Brownwood
Posts: 46
M.O.C. #24855
I used a plastic tarp. Cut to fit plywood and tucked under the plywood and stapled. Mattress will slid allowing Kelly the ability to tuck fitted sheet on the corners.
Rick n Kelly is offline   Reply With Quote
Old 11-06-2020, 04:23 AM   #7
RMcNeal
Montana Master
 
RMcNeal's Avatar
 
Join Date: Oct 2019
Location: Jacksonville
Posts: 2,117
M.O.C. #25165
I had some wool moving blankets and put one under the bed on the plywood. Also keeps warmth in.
__________________
Robert & Diana McNeal
2019 Montana Legacy 3791RD 20th Anniversary Edition
2014 F350 4x4 6.7L SRW
RMcNeal is offline   Reply With Quote
Old 11-16-2020, 06:23 AM   #8
DebNJim B
Montana Master
 
DebNJim B's Avatar
 
Join Date: Jan 2018
Location: Northville, NY
Posts: 807
M.O.C. #21158
Quote:
Originally Posted by Rick n Kelly View Post
I used a plastic tarp. Cut to fit plywood and tucked under the plywood and stapled. Mattress will slid allowing Kelly the ability to tuck fitted sheet on the corners.
LOL...when I first started reading I thought you were talking about the trash can and was wondering how you emtied it...
__________________
Jim B
2017 Lariat F-350 FX4, CC, SB, 6.7 PSD 4WD
2018 MONTY 3731FL, at our private winter site in GA

DebNJim B is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 01:23 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.