|
|
05-05-2006, 02:47 PM
|
#21
|
Montana Master
Join Date: Oct 2005
Location:
Posts: 1,568
M.O.C. #4890
|
Remember a torque wrench used in an industrial application is sent out and re-calibrated every year and when you buy a new quality torque wrench it will have a calibration certificate with it. If you only use this wrench for your Montana and remember to back off the setting every time you use it, it will stay accurate for many years I am sure. A used torque wrench, who knows the history, so it should be re-calibrated for sure.
|
|
|
05-07-2006, 04:50 AM
|
#22
|
Seasoned Camper
Join Date: Sep 2005
Location: Atlanta
Posts: 69
M.O.C. #4518
|
Craftmen high dollar torque wrench is good if you rebuild engines but wheel lugs have a range of 90 to 120 and do not need a high dollar wrench. Walmart wrench or Harbor Fraight wrench is good enough for lug nuts. No need to spend a lot of money just for lug nut tightening.
|
|
|
05-07-2006, 06:52 AM
|
#23
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
The above is true howver I just used my Sears model to install the bedsaver which meant removing some of the hitch bolts and I would sort of like to have those at the correct torque..again, depends on what and how you intend to use it.
|
|
|
05-07-2006, 05:09 PM
|
#24
|
Montana Master
Join Date: Aug 2004
Location: Livermore
Posts: 5,142
M.O.C. #1920
|
Lots of personal preferences when it comes to tools, wheels, tow vehicels, tires, floor plans, etc. However, not putting aluminum wheels on because of fear is not necessary. It just takes a little bit more precaution. As someone mentioned earlier, they will tend to loosen a little at first and then settle in. Whether you have steel wheels or aluminum, you should still torque them. And don't forget to do it in a star pattern. If you haven't gotten the Keystone torque CD, request one - they're free and they do a good job of explaining the why's and how's. By the way, Menards also has a nice Tool Shop brand that is good and sturdy and comes in a nice case.
__________________
Ron and Terrie Ames - MOC #1920/KF0NTA
2021Montana 3230CK Super Solar Legacy Package
2021 Ram 3500 Laramie Longhorn, BIM Charging
4x4, SRW, LB, Crew Cab, Pullrite 3900 Hitch
|
|
|
05-07-2006, 06:51 PM
|
#25
|
Montana Master
Join Date: Oct 2005
Location:
Posts: 1,568
M.O.C. #4890
|
There is nothing wrong with aluminum rims. Walk around any campground and you will see the majority of high end units,
RVs and pickups have them. The cheap steel wheels that come on new units are not without problems of their own.
|
|
|
05-08-2006, 03:01 AM
|
#26
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
Althoug we have had problems with aluminum wheels that was only a single issue of not getting them on the 3400. Yes the steel wheels are cheapos but so are the aluminum wheels and they tend to get bad looking in a short time depending on the climate. The aluminum wheels were a $660 MSVRP option. I will put that $660.00 toward a really good set of Aluminum wheels and a really good set of tires down the road.
|
|
|
05-08-2006, 03:39 PM
|
#27
|
Montana Master
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
|
I also have the Walmart torque wrench. It may not have quite the precision of a high dollar wrench, but it is good enough for everything I use it for. Someone mentioned rebuilding engines, where precise torque numbers are critical. That requires a high quality wrench. But wheel lug nuts, hitch bolts, and most other things I would do are expressed in a range of torque values. In all those situations I feel being somewhere within the range is good enough. If you're over a couple of lb-ft, nothing is hurt. My torque wrench easily fills that bill. If I were tearing down engines as in my youth I'd have a much better wrench. For what I use it for now, the Walmart wrench works very nicely. As always, just my opinion and not necessarily agreed to by others. Nothing wrong with a high quality wrench, though, especially if it makes you feel better.
|
|
|
05-10-2006, 03:03 PM
|
#28
|
Montana Master
Join Date: Nov 2004
Location: Mayville
Posts: 629
M.O.C. #2486
|
I always get a laugh about dealers and the manufacturer bible, telling everyone to torge the lug nuts after fifty miles and whatever. Your 5vr or tt may have been transported over 500 miles by the rv transporter. Part of his job, before he leaves the yard, is to do the lug nuts. Most have a four bar, and armstrong torque. I would hope that the dealer could at least, check the lugs on a trailer that cost $50,000 or more.
|
|
|
05-11-2006, 03:34 PM
|
#29
|
Montana Master
Join Date: Oct 2005
Location:
Posts: 1,568
M.O.C. #4890
|
As a millwright I pull wrenches for a living and I would estimate that 98 % of the fasteners I tighten, I do by feel, with no torque wrench, as most of the people in my trade. For very special jobs we use torque wrenches and torque multipliers to make sure we are doing the correct torque. I also have tightened the wheels on all my vehicles for the last 38 years without using a torque wrench. Travel trailer aluminum wheels are a different matter and they do require re-torquing when they are mounted. Once they are set they usually are fine but it is only prudent to check them.
This is no laughing matter and when I left on my trip 3 weeks ago, my aluminum wheels took 3 times before they did not require re-torquing. Now 1500 miles later, they have not changed.
Many of the problems people are having with wheels are caused by failure of owners to follow instructions.
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|