Awning LED Strip Fuse

[mwoodsc]

I have a 2018 Montana 3811 and one of the awning light strip quit. I’ve read all of the similar posts saying there’s a 3 amp fuse behind the panel. I have the IN-command panel and don’t know hot to remove it. Does the panel face pop off, cause it seems like it’s wanting to break on me?

[5acresofchaos]

My InCommand is attached to a wall panel in basement and it’s easier to just back out the 6 screws holding the wall panel and access fuses on bottom right side of the InCommand. Mine has 6-8 inches of extra wire and it’s off and back on in 5 minutes.