New side seals

[bradufault]

I have been looking for the side seals on my Montana. It is the one that covers the seam between the side panels and the skirt. The seal covers a aluminum strip that is screwed in to hold the panels. Thanks for the help. Brad

[rohrmann]

It would help if you adjusted your signature line to also add the year of your 2015 trailer. Our rig uses all the same seals on the sides as well as the top of the slides. We also have the bulb seals on the flanges of the slides which also deteriorate and need replacement. I've purchased the seals from Trekwood and Amazon. You need to verify exactly which seals you have before ordering. From Trekwood, the prices are by the foot, and contrary form other's experiences, I have found their shipping to be not too bad, but haven't ordered large parts that would cost a lot to ship.

https://www.trekwood.com/products/44...lip-On-1225-Bx
https://www.trekwood.com/products/44...k-Wall-1000-Bx
https://www.amazon.com/AP-Products-0...%2C302&sr=8-41


After rereading your post, maybe this is the trim piece you are looking for: https://www.trekwood.com/products/44...ew-Cover-White

[bradufault]

The seal that’s runs about 1/8 the way up from the bottom on the rig and goes on both sizes is different. I tried looking in those sires without much luck.
Thanks anyway

[jimcol]

I used the one like Bob referenced from trekwood but found it on Amazon. Also used this one from Amazon; https://www.amazon.com/QPN-Insert-Mo...14&sr=8-2&th=1

This link should take you to the many available from Amazon. https://www.amazon.com/s?k=rv+seal+t..._ts-doa-p_1_20

[jcurtis934]

The covering for the metai you refer to is different from the other vinyl inserts on my trailer. It is a hard vinyl cover that snaps over the aluminum track. You should be able to get it from places like LaMesa RV. You probably will have to take a picture of it and measure the height of the track in order for them to know exactly what you need.