|
08-07-2012, 03:53 PM
|
#1
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Clothes Rod
Anyone who's gone full time will understand this one. We had way more stuff than we had ever imagined and particularly clothes. Having stored some in our storeage building and in the basement we still had a full clothes rod full in the closet. Opened the closet after we set up yesterday and there was the metal rod off the supports and bent beyond repair.
Got a home style wooden rod and some real rod holders for the ends (ours came with plastic) and went to work. Had to mark the rod and take the supports into the shop and drill a pilot hole for a screw and then use a hammer to fit them on the rod. Put the supports and attached rod back up. Ran screws in the holes to hold the rod (I have no idea how the rod kept the old metal rod in place so long) and then attached the rod holders to the wall and now we have one that can support some weight. We did sort a bag of clothes for the thrift store out before we put the others back however.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
08-07-2012, 04:39 PM
|
#2
|
Montana Master
Join Date: Jun 2004
Location: Benson
Posts: 3,121
M.O.C. #1658
|
I ended up placing a piece of pvc from the floor to the middle of the rod. That took care of all the rod support problems and keeps my wife on her side of the closet.
|
|
|
08-07-2012, 05:05 PM
|
#3
|
Montana Master
Join Date: Jun 2010
Location: Colorado Springs
Posts: 3,335
M.O.C. #10496
|
__________________
2010 3150RL
LevelUp, Dual 6 volt batteries, Progressive Industries EMS HW50C, Honda EU2000i Generator, Bridgestone Duravis R250 tires, Torklift Glowstep Revolution Stairs, LED Tail lights
2015 RAM 3500 Laramie SRW LB CC Cummins 6.7L Aisin Trans B&W RVK3600
|
|
|
08-07-2012, 05:42 PM
|
#4
|
Site Team
Join Date: Aug 2007
Location: Omaha
Posts: 6,794
M.O.C. #7560
|
|
|
|
08-08-2012, 02:11 AM
|
#5
|
Montana Master
Join Date: May 2010
Location: Tampa
Posts: 532
M.O.C. #10378
|
Charlie, Your idea of a pvc support is great. I like the idea of dividing the closet into his and hers. I just wondered how
the support rod would work when placed on the 8-9 inches of my side of the clo
set which is all I am allocated.
instead of the middle.
|
|
|
08-08-2012, 02:11 AM
|
#6
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,727
M.O.C. #7992
|
Charlie, Noticed you said her side, not her half. Bet the piece of PVC is not in the middle of the rod! Jim
Quote:
quote:Originally posted by 8.1al
I ended up placing a piece of pvc from the floor to the middle of the rod. That took care of all the rod support problems and keeps my wife on her side of the closet.
|
__________________
2006 3000RK
2009 Ram 2500
|
|
|
08-08-2012, 02:17 AM
|
#7
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,727
M.O.C. #7992
|
Dave, Look at the time stamps on our post. Marital reality must of hit us at the same time. Jim
Quote:
quote:Originally posted by nosticks
Charlie, Your idea of a pvc support is great. I like the idea of dividing the closet into his and hers. I just wondered how
the support rod would work when placed on the 8-9 inches of my side of the clo
set which is all I am allocated.
instead of the middle.
|
__________________
2006 3000RK
2009 Ram 2500
|
|
|
08-08-2012, 02:30 AM
|
#8
|
Montana Master
Join Date: May 2003
Location: New Bern
Posts: 4,294
M.O.C. #311
|
Dick, we had one bust at the fall rally a couple years ago. I went to hard ware store and got one that has the center support and installed it. No problems since. We do not realize how heavy those clothes are until you try to lift them all at once.
|
|
|
08-08-2012, 02:49 AM
|
#9
|
Montana Master
Join Date: Feb 2007
Location: Winfield
Posts: 7,327
M.O.C. #6846
|
The closet rod is one thing that I am actually impressed with on the 3750 model. The 3400 did not have any supports but the new model actually has two supports that are mounted to the top of the closet. So far no problems, but I do remember that many forum members with the 3400 model had to add supports to the rod.
Bingo
__________________
Bingo and Cathy - Our adventures begin in the hills of WV. We are blessed by our 2014 3850FL Big Sky (previous 2011 3750FL and 2007 3400RL) that we pull with a 2007 Chevy Silverado Classic DRW CC dually.
|
|
|
08-08-2012, 03:44 AM
|
#10
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Generally in life, it's not what you need that determines what you own. Just had and continue to have a problem throwing out perfectly good stuff. This was a wakeup call and some more stuff went (probably still not enough). I'll know we succeeded at full timing when we've worn out and thrown out enough that I get to your inventory level. Wait Don't you still have a stick house
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
08-08-2012, 03:45 AM
|
#11
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Quote:
quote:Originally posted by H. John Kohl
Dick, we had one bust at the fall rally a couple years ago. I went to hard ware store and got one that has the center support and installed it. No problems since. We do not realize how heavy those clothes are until you try to lift them all at once.
|
No Kidding!! Another time when I had to acknowledge that "I'm not the man I never was"
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
08-08-2012, 03:49 AM
|
#12
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Quote:
quote:Originally posted by bncinwv
The closet rod is one thing that I am actually impressed with on the 3750 model. The 3400 did not have any supports but the new model actually has two supports that are mounted to the top of the closet. So far no problems, but I do remember that many forum members with the 3400 model had to add supports to the rod.
Bingo
|
Ours actually had two supports screwed to the angled front in front of the cap. Because of the angle those supports were almost open at the bottom. That's why when I replaced the rod I hammered those supports back on and drilled the holes for the screws so that this time the rod couldn't jump out. My guess would be that a rear bedroom would have a flat ceiling above the rod and would be easy to attach the supports so the actually held something.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
08-08-2012, 06:21 AM
|
#13
|
Montana Master
Join Date: Oct 2007
Location: Land O Lakes
Posts: 2,752
M.O.C. #7753
|
When ours bent it just barely fell out of the end caps. I got a broom stick and shoved it into the metal rod after I rebent it. there was a center support screwed into the bottom of the top shelf and there is a 3/4 inch wooden plate up there as a strength member but the screws that held the center support were stripped so I filled the holes with toothpicks and gorilla glue and used BOLTS this time. It will have to take the whole shelf next time.. I also cut down my hanging stuff to a jacket, a coat and a rainsuit.. The rest can fold into a drawer since T-shirts don't need to be hanging up...
|
|
|
08-08-2012, 09:25 AM
|
#14
|
Montana Master
Join Date: Sep 2010
Location: Topsham
Posts: 904
M.O.C. #10761
|
|
|
|
08-10-2012, 06:06 AM
|
#15
|
Montana Master
Join Date: Feb 2005
Location: Sioux Falls
Posts: 729
M.O.C. #3206
|
For your future reference- When the closet rod comes down, replace the rod with a piece of 2 inch electric conduit- Ours has been holding up for about 6 years without any problems- JMHO- Don
|
|
|
08-10-2012, 07:48 AM
|
#16
|
Montana Master
Join Date: Feb 2008
Location: Lincoln
Posts: 861
M.O.C. #8154
|
When DW opened the closet door on our 1st trip to the Q and saw all of her clothes on the floor, she commented that perhaps she may have packed too much. That thought quickly left as she said it must have been crappy materials. I replaced mine with a 3/4 galvanized steel water pipe. Now she can include Stanley's wardrobe. I'm allowed a small drawer in the corner.
Ken
|
|
|
08-10-2012, 08:24 AM
|
#17
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
I know what you mean.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|