|
01-21-2009, 10:38 AM
|
#1
|
Montana Master
Join Date: Sep 2004
Location: Leona
Posts: 6,382
M.O.C. #2059
|
Is it just us.........
..............who do not like the light switch outside the bathroom? Old people get up in the middle of the night. Trying to turn on the light without shining it into your spouse's eyes is not possible. It is a 12 VDC light just 2 wires, an easy fix. I am gonna change that. Do they make a dummy switch to fit into the old slot?
|
|
|
01-21-2009, 11:01 AM
|
#2
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,175
M.O.C. #6433
|
No. Not just you. We leave the outside switch on at night and use the switch on the light fixture.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
01-21-2009, 11:04 AM
|
#3
|
Montana Fan
Join Date: Oct 2007
Location: Amarillo
Posts: 125
M.O.C. #7742
|
We use the Night Owl motion activated light in our bathroom and it works great--not too much light but enough to not be in the dark--I mounted mine on the outside wall just above half way up--
$34.98 for a two pack at Camping World and that is cheaper than other internet sites--
|
|
|
01-21-2009, 11:07 AM
|
#4
|
Montana Master
Join Date: Sep 2004
Location: Leona
Posts: 6,382
M.O.C. #2059
|
That's what we did on the other unit, but this one has no switch on the fixture. It is one of the round recessed types. It uses a 10 watt halogen bulb.
|
|
|
01-21-2009, 11:22 AM
|
#5
|
Montana Master
Join Date: Jun 2004
Location: Victor
Posts: 940
M.O.C. #1709
|
Stiles,
Im not to familiar with your unit but could you cut the hole out on the BRM side and just reverse your box and switch to fit in there? Then get a color matching blank plate and some colored screws to attach it over the old hole. Or maybe just put a three way switch in on the two sides.
|
|
|
01-21-2009, 11:24 AM
|
#6
|
Montana Master
Join Date: Nov 2007
Location: Canon City
Posts: 1,340
M.O.C. #7919
|
We do like BB_TX. Works for us and don't have to worry about me leaving the light on.
|
|
|
01-21-2009, 11:24 AM
|
#7
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
I just put one of those round battery operated sticky lights on the inside wall. Been working for over a year with no battery replacement and gives off enough light.
|
|
|
01-21-2009, 12:10 PM
|
#8
|
Montana Master
Join Date: Feb 2003
Location: Englewood
Posts: 3,095
M.O.C. #164
|
We also use the battery stick up we call it "The Pot Spot"
|
|
|
01-21-2009, 12:48 PM
|
#9
|
Montana Master
Join Date: Aug 2006
Location: Lone Tree
Posts: 5,615
M.O.C. #6109
|
Our 3400 had one switch by the sink for both the bathroom and the hall. I split them up onto separate switches. The power runs out of the switch, hits the bathroom light first, then the hall.
I removed the bathroom light from that circuit (+) allowing the existing switch to still control the hall. Then I fished a new wire from the bathroom light down the wall by where the existing switch is to serve as the new switched (+) for the bathroom light. All the ground wires (-) were used as is, I didn't have to pull new ones.
Hint: To get wire through the wall into the ceiling, I used the existing wire as a pull tape to pull fish wire up to the ceiling light, tied an additional wire to the existing, then pulled it back down the wall with the fish wire.
I powered the bathroom light from the existing power source, only through a new switch I installed inside the bathroom directly behind the existing switch.
The new switch installed (note the second switch I installed to controll the fantastic fan I put in the bathroom at the same time).
Not sure what switches the Big Sky uses, but I found the factory Montana ones here:
RV Lifestyles
|
|
|
01-21-2009, 01:20 PM
|
#10
|
Montana Master
Join Date: Sep 2006
Location: Casa Grande
Posts: 5,369
M.O.C. #6333
|
Stiles, We have a puck light stuck under the shelf. Step in, push light, do your thing. 20 months and no replacement yet. Don't have to fish wires that way. Easy way out I guess.....
|
|
|
01-21-2009, 02:10 PM
|
#11
|
Montana Master
Join Date: Sep 2006
Location: Wappingers Falls
Posts: 1,303
M.O.C. #6263
|
Brad's method is same one we used on ours. Hall light remains on circuit, routed new feed down wall and also pulled lower panel on ceiling fan to gain access to help fishing wires.
|
|
|
01-21-2009, 03:46 PM
|
#12
|
Montana Master
Join Date: Aug 2004
Location: Cedar Rapids
Posts: 4,876
M.O.C. #1944
|
Quote:
quote:Originally posted by BB_TX
No. Not just you. We leave the outside switch on at night and use the switch on the light fixture.
|
Exactly what we do. Pretty simple, huh?
Orv
|
|
|
01-21-2009, 04:21 PM
|
#13
|
Montana Master
Join Date: Sep 2004
Location: Leona
Posts: 6,382
M.O.C. #2059
|
That sure did work when I had an inside/outside switch deal. On the 2008 Big Sky, I don't have one. Only one switch and that is on the outside. So if I don't like the way it works, then I have to move it or use an alternate source of lighting as has been suggested. Hardware out of Brad's URL will cost about $10.00 to change the position of the switch. If I actually do it, I will report back.
|
|
|
01-21-2009, 04:28 PM
|
#14
|
Montana Master
Join Date: Aug 2006
Location: Lone Tree
Posts: 5,615
M.O.C. #6109
|
Quote:
quote:Originally posted by BB_TX
No. Not just you. We leave the outside switch on at night and use the switch on the light fixture.
|
We got by with that method on our 2003 for a couple of years, but the kids can't reach the overhead switch. They either were falling on the steps waking us up, or we left the switch on and they blinded us awake. I figured I would do this one so they could reach.
This was also the reason I switched the fan down on the wall as well. (little bit more tricky - you have to intercept the fan switch and switch to ground so the automatic lid will close when you shut it off).
|
|
|
01-22-2009, 01:51 AM
|
#15
|
Montana Master
Join Date: Jan 2007
Location: Lobelville
Posts: 2,128
M.O.C. #6650
|
We are lucky to have a switch on the equipment panel that controls a light in the toilet room and also lights the bedroom steps. There is just enough light to be able to see but doesn't blind you at night. GBY....
|
|
|
01-22-2009, 02:05 AM
|
#16
|
Montana Fan
Join Date: Jan 2005
Location: Hernando
Posts: 127
M.O.C. #2888
|
I also didn't like the switch on the outside of the door on our 3500. We used the stick up battery powered light for a couple of years. Last summer, I changed out the light in the potty room from a single to double bulb fixture, added a switch on the inside and wired the outside switch to control 1 bulb of the double bulb fixture, and the inside switch to control the other bulb. Works well for us.
|
|
|
01-22-2009, 06:35 AM
|
#17
|
Montana Master
Join Date: Sep 2007
Location: Texas City
Posts: 5,736
M.O.C. #7673
|
I did the LED Puck Light under the shelf. It points down where the light is needed and does not glare enough to fully wake me. Lasts a long, long time.
|
|
|
02-10-2009, 11:15 AM
|
#18
|
Established Member
Join Date: Jan 2009
Location: San Juan Bautista
Posts: 48
M.O.C. #9021
|
We just installed two Night Owl battery operated, motion sensor LED stick on lights. One over the bedroom steps and one in the toilet area. They work great and just enough light.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|