|
Since MORryde sliding tray information claims an easy install in minutes and all you need is a screw gun, I would assume they come with the attaching screws. If screws are not included the mounting hardware will be pre-drilled so depending on the size of those holes you can determine your screw size, perhaps a #10 or #12 screw. I believe the floor in the storage area is 3/4" thick and you would not want to extend the screw through the floor, so you are likely looking at about a 3/4" screw. Personally I would use machine screws and not wood screws but do not know if the mounting hardware has countersunk holes, in which case you would want to use a countersunk wood screw.
Wish I could afford some of those myself. Good luck with the install.
|
Hybrid Mode
