Super Solar Incorrect Settings

[rames14]

Emergency Information - Super Solar
We came across some information that could decrease your charging capability on Super Solar units. We found at least two units at rally that were only charging to 13.5v. We found several issues that can be traced back to Keystone instructions. First up was Neal Katz. We found his charge voltage was set to 13.5v instead of 14.2v. We changed that but nothing changed for a few days and it finally did get to 14.2v. Today, we looked at the Magnum inverter charge settings (settings/rotate dial to #4, Charge settings). It should say Custom. Rotate to Absoption. It should be 13.5v. It was set to 14.2v. Rotate left to 13.5v and push the round knob. This sets it to 13.5v. Next rotate to Float. This was set at 13.5v and should have been set at 14.2v. The net result was charging only to 13.5v instead of 14.2v. We found similar issue with Jim Santore’s unit. I have already sent info to Keystone and Matt Wolkins. It’s easy to check and fix yourself. Hope this helps someone solve a problem.