Last year I had the IS And disc brakes added to the Monty and am very happy with both systems. However I am confused by what I see on the hub. There is a clear plastic covering that says Kodiak on it and a rubber plug but no zerk behind it. On the Morryde invoice it shows I was billed for EZ lube parts but that system has zerks. I opted for the Timken bearing upgrade. Is this a never lube system and if not then how often and how do I lube the wheel bearings? I have attempted to contact Morryde by e mail but for some reason my message won,t send.
I just had MORryde do an annual bearing repack and inspection of IS and Disc Brakes on my 2018 Montana 3921FB. I too went with Timken Bearings. I suggest you contact Brian Hosinski at firstname.lastname@example.org or phone 574-293-1581 for the answer to your questions.
We just had the IS installed in June. Disc brakes transferred over with new timkin bearings. From what I understand after discussions with Brain and others, the ez lube is only available on the 8k IS. Why, I don't know. Makes no sense to me.
2018 Chevy 3500 LTZ Dually Diesel 4x4 CCLB
2011 Montana 3455 SA. 6 point level up. Disc brakes. Curt Q24 Hitch
Progressive EMS. Valterra tank valves. Sailun G637 tires. ARP fridge control. All led lighting. Mor Ryde IS
I have 8K Timken's and I have mine repacked annually by hand. There is also a grease zerk on the bottom of the structure that needs grease every year.
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
2017 3500 Dodge Maxi DRW 4X4, Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, etc.