Install a desk

[HaveRV.Willtravel64]

Hi there,
Have a 2021 3761FL with 2 couches.
Want to remove one so I can install a sit/stand desk for the computer,etc.
I know there's a gap where the couch sits -like a platform - in the slide.
Just want to make sure I won't hit any major wiring if I do install the desk as I would want it to have some sort of screws, mounting attachment so the desk doesn't tumble traveling down the road.
Any ideas, suggestions would be appreciated.

[rohrmann]

We removed the floor mounted dining table in our rig and put a buffet in its place. I used short angle brackets attached to the legs and used 3/4” screws into the floor so they would not protrude all the way through the floor, and this has worked well.

[Todd & Mary]

I will be watching this thread closely! We have been considering the same thing. The only drawback is the slide is set up about 6" higher than the floor. So a rolling chair would most likely be dangerous. And there is wiring coming up from the floor in the middle of the slide. Not quite sure what that is for yet.

[DQDick]

Our couch was secured with screws so when I installed the desk I used screws that wouldn't protrude more than the factory ones did.