Slides stop on 12v

[brenkco]

When extending or retracting my slides on 12v, the slides stop, lights go off. Once I release the switch, there is a reset & I can continue moving the slides. I have 2-12 volt batteries. Thinking I might have a bad battery, I disconnected one and tried moving the slides with the same problem. I switched batteries with no change.

This doesn't happen when connected to shore power.

Any thoughts or suggestions?

Thanks,

Ken

[HOOK]

There has been a thread here about this with pictures. Just replace the 40A circuit breaker with an 80A and all should be well. Maybe someone will come along who remembers the thread.

[brenkco]

Found the thread
Thanks Larry
Ken

[mhs4771]

Yep, was haveing that problem with our rig when dry camping. Added a second breaker and all is good.