Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×
 

Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > MOC Technical Forums > Additions & Improvements
Click Here to Login

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 10-17-2021, 07:59 AM   #21
kowbra
Montana Fan
 
Join Date: Jul 2020
Location: Battleford
Posts: 487
M.O.C. #26690
Quote:
Originally Posted by Bryan T View Post
We have a 3791RD with a GE Residential Refrigerator and when we got it one of the doors swung all the way open and the handle would hit the glass on the pantry door. I asked my wife to look at the manual for the refrigerator to see if there was an adjustment to make the door stop sooner and she said no. I guess I didn't recheck the manual to verify this, but I decided to come up with a different way somehow.

I fastened a zip tie to the post at the top of the door and another on the lever that goes into the body of the unit up near the top of the door. Then I put a zip tied between the two and drew it tight enough to stop the door swing to where I wanted it. A small piece of tape the keep the two sides of the middle zip tie from separating and another to hold the zip tie on the post on the door in place and that's about it. When the door shuts it folds up out of the way and doesn't get behind the gasket and isn't really visible when looking at the fridge from the front. It's a pretty rudimentary fix but it's functioning quite well actually right now. Keeps the door about a foot from the pantry when fully open. We're still careful while opening the door and it doesn't seem like it's putting too much pressure on the lever coming out of the body of the fridge, but we shall see I guess.

If I find the zip ties start snapping or some other reason this doesn't work, is there another way people are keeping the door handle off the pantry door glass? Or did I waste my time and there's a door adjustment that handles this?
Good idea!
We have the RV fridge, but it has a similar issue. I'm going to see if your idea will work on the RV fridge.
Thanks for posting this!

Brad
 
__________________
2021 Montana 3790RD, Legacy, Super Solar Flex
2020 RAM 3500 Limited, HO
kowbra is offline   Reply With Quote
Old 10-17-2021, 08:08 AM   #22
kowbra
Montana Fan
 
Join Date: Jul 2020
Location: Battleford
Posts: 487
M.O.C. #26690
8a. BEDROOM - under bed drawers

8a. BEDROOM - under bed drawers

We wanted to organize the storage in the bedroom, and my wife really liked the idea of drawers under the bed. I was reluctant as I did not want to lose a lot of space to the drawer hardware, and I was not sure that the bed framing would work if I cut holes in it. Well, once I measured everything I realized that I could put drawers in the bed and still have a lot of bulk storage left in the middle for extra bedding. And, when I looked at the bed frame and saw how it was built, I realized that the side panels had only one center support and I could make drawers on either side without compromising any strength for supporting the bed.

Here's some photos. Enjoy!
Brad

... link back to Index ...
Attached Thumbnails
Click image for larger version

Name:	BedDrawers-1.jpeg
Views:	3
Size:	98.2 KB
ID:	10361   Click image for larger version

Name:	BedDrawers-2.jpeg
Views:	2
Size:	91.0 KB
ID:	10362   Click image for larger version

Name:	BedDrawers-3.jpeg
Views:	3
Size:	162.1 KB
ID:	10363   Click image for larger version

Name:	BedDrawers-4.jpeg
Views:	3
Size:	85.3 KB
ID:	10364   Click image for larger version

Name:	BedDrawers-5.jpeg
Views:	3
Size:	103.8 KB
ID:	10365  

Click image for larger version

Name:	BedDrawers-6.jpeg
Views:	3
Size:	129.8 KB
ID:	10366   Click image for larger version

Name:	BedDrawers-7.jpeg
Views:	2
Size:	113.9 KB
ID:	10367   Click image for larger version

Name:	BedDrawers-8.jpeg
Views:	3
Size:	96.7 KB
ID:	10368   Click image for larger version

Name:	BedDrawers-9.jpeg
Views:	3
Size:	82.7 KB
ID:	10369   Click image for larger version

Name:	BedDrawers-10.jpeg
Views:	2
Size:	88.0 KB
ID:	10370  

Click image for larger version

Name:	BedDrawers-11.jpeg
Views:	4
Size:	95.5 KB
ID:	10371   Click image for larger version

Name:	BedDrawers-12.jpeg
Views:	3
Size:	102.8 KB
ID:	10372  
__________________
2021 Montana 3790RD, Legacy, Super Solar Flex
2020 RAM 3500 Limited, HO
kowbra is offline   Reply With Quote
Old 10-18-2021, 06:47 AM   #23
kowbra
Montana Fan
 
Join Date: Jul 2020
Location: Battleford
Posts: 487
M.O.C. #26690
9b. DINING - shelves beside table

9b. DINING - shelves beside table

I love the shelf and cabinet that Montana puts in the dining area. But it doesn't have any storage, which would be really convenient. By adding shelves to either side, storage is added without losing any space.
I started by making a frame using some 3" trim, ripped into 1 1/2" pieces. Then, I attached 1/4" plywood strips to the inside of the frame and to the wall.
Next, I cut some pieces of 1/8" white wallboard to use as the shelves.
Then, some 1x8" pine shelving was stained and installed as the tops.
Finally, to use as storage, I found some fabric drawer organizers on Amazon that were the perfect size. Link here

Photos below. Enjoy!

Brad

... link back to Index ...
Attached Thumbnails
Click image for larger version

Name:	DiningShelf-1.jpeg
Views:	2
Size:	166.5 KB
ID:	10380   Click image for larger version

Name:	DiningShelf-2.jpeg
Views:	1
Size:	133.0 KB
ID:	10381   Click image for larger version

Name:	DiningShelf-3.jpeg
Views:	2
Size:	100.0 KB
ID:	10382   Click image for larger version

Name:	DiningShelf-4.jpeg
Views:	2
Size:	105.8 KB
ID:	10383   Click image for larger version

Name:	DiningShelf-5.jpeg
Views:	1
Size:	95.6 KB
ID:	10384  

Click image for larger version

Name:	DiningShelf-6.jpeg
Views:	2
Size:	94.8 KB
ID:	10385   Click image for larger version

Name:	DiningShelf-7.jpeg
Views:	2
Size:	92.1 KB
ID:	10386  
__________________
2021 Montana 3790RD, Legacy, Super Solar Flex
2020 RAM 3500 Limited, HO
kowbra is offline   Reply With Quote
Old 10-18-2021, 06:55 AM   #24
kowbra
Montana Fan
 
Join Date: Jul 2020
Location: Battleford
Posts: 487
M.O.C. #26690
9b. DINING - printer drawer

9b. DINING - printer drawer

As part of working on the road, we needed to setup the dining table as a workspace. The first part was to get some "desk storage", which is in the prior post to install shelves on either side of the dining table.
The next part is to have a place for a printer, handy to the workspace. In prior posts, I showed how I installed drawers in the area underneath the couches. My wife came up with the idea of installing the printer into one of the drawers, and this is the project to do that.

The drawer was already built and installed, so I built a removable shelf to install on top of the drawer. This supports the printer, and allows storage underneath the printer.
Now, to use the printer, just open the drawer!

Enjoy!
Brad

... link back to Index ...
Attached Thumbnails
Click image for larger version

Name:	PrinterShelf-1.jpeg
Views:	2
Size:	77.3 KB
ID:	10387   Click image for larger version

Name:	PrinterShelf-2.jpeg
Views:	2
Size:	72.2 KB
ID:	10388   Click image for larger version

Name:	PrinterShelf-3.jpeg
Views:	2
Size:	78.1 KB
ID:	10389   Click image for larger version

Name:	PrinterShelf-4.jpeg
Views:	2
Size:	90.6 KB
ID:	10390  
__________________
2021 Montana 3790RD, Legacy, Super Solar Flex
2020 RAM 3500 Limited, HO
kowbra is offline   Reply With Quote
Old 10-18-2021, 08:11 AM   #25
Martyw69
New Member
 
Join Date: Oct 2021
Location: Spokane
Posts: 3
M.O.C. #29843
What about reversing the swing on the doors
Martyw69 is offline   Reply With Quote
Old 10-18-2021, 08:15 AM   #26
kowbra
Montana Fan
 
Join Date: Jul 2020
Location: Battleford
Posts: 487
M.O.C. #26690
Quote:
Originally Posted by Martyw69 View Post
What about reversing the swing on the doors
Yes, I was thinking of that. I haven't done that yet as I would need to get some wood putty to fill the holes on the hinges, but I think the dealer has some.
I think it would make it a bit more convenient, for sure.

Thanks!
Brad
__________________
2021 Montana 3790RD, Legacy, Super Solar Flex
2020 RAM 3500 Limited, HO
kowbra is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 10:21 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.