|
06-04-2006, 10:59 AM
|
#1
|
Montana Master
Join Date: May 2005
Location: Fall Creek
Posts: 1,332
M.O.C. #3699
|
Move Dinning Table?
On my 2955RL the dinning table is too close to the window. It is screwed down to the slider floor, can I move it about 1-2 inches away from the window to better access the window and shades and then screw it back to the floor in the new location?
__________________
Bob and Nancy Kassl Fall Creek, Wisconsin
2015 Montana 3440RL Legacy Edition, G614's, Pressure Pro TPMS, Dish Tailgaters
2016 GMC Sierra Denali 3500 CC SRW, Iridium Metallic, Duramax Allison Transmission
|
|
|
06-04-2006, 12:29 PM
|
#2
|
Montana Fan
Join Date: Jan 2005
Location: Ore City
Posts: 325
M.O.C. #2831
|
Bob and Nancy, we have the same problem that you have in our 2955 with the table being too close to the window. David and I always raise the shade together to keep the shade from getting caught on the curtain or getting messed up. It has happened. We certainly would like an answer to that question too about moving the table out just a little in order to be able to raise the shade with greater ease.
Countrygirl or Shirley
|
|
|
06-04-2006, 12:32 PM
|
#3
|
Montana Master
Join Date: Nov 2005
Location: Campbell River
Posts: 970
M.O.C. #4976
|
Hi Bob and Nancy,
We have a 2980RL, and the first thing we did when we brought it home was to take the screws out of the table that hold it the floor. ( When travelling )We turned the table 90 degrees and put two chairs up agaist the wall under the dining room window and leave the other two chairs at home. Most of the time we eat outside if it's nice & if you have some one in for dinner we use a couple of lawn chairs. With the table turned it is easy to get to the back of the trailer and into the fridge when stopping along the road. When we are at a place for a few days or more we put the table back to the way it was, less the screws. Oh yea, when we travel I have put some I-hooks in the floor by the couch and by the front wall of the slide, and under the table top so I can buggee cord the table down. With that it dosen't move at all even on rough roads. Hope this helps.
J&D
|
|
|
06-04-2006, 12:59 PM
|
#4
|
Montana Master
Join Date: Jan 2003
Location: Haldimand County
Posts: 2,413
M.O.C. #122
|
In our previous 3255RL we moved the table out slightly, just enough to give clearance for the shade. In the 3670RL that we now have, it was not a problem, but we have turned the table 90 degrees, so that we sit facing the side window. We leave two chairs at home. This seems to give us more space and easier access to the dining table.
|
|
|
06-04-2006, 01:18 PM
|
#5
|
Montana Master
Join Date: Feb 2004
Location: Wetumpka
Posts: 4,936
M.O.C. #1105
|
We moved our dining table from the curbside slideout to the rear of the trailer. We have much more room there. Glen just screwed it down in its new position. He put screws into the original screwholes so that we could identify the position of the table if we wanted to move the table back. It's not necessary tho.
|
|
|
06-05-2006, 01:50 AM
|
#6
|
Montana Master
Join Date: Jul 2003
Location: Clearwater
Posts: 10,917
M.O.C. #420
|
We moved our dining room table into the corner and it has become our computer desk.
We used the same crews and screwed it back down.
|
|
|
06-05-2006, 03:18 AM
|
#7
|
Montana Master
Join Date: Aug 2004
Location: Yuma
Posts: 856
M.O.C. #1935
|
We have a 2004 3575 which already has a fairly large Desk 32 X 70" but we also have a 19 X 27 "beverage cart" we bring along with us and found that if we unscrewed the table, turned it 90 degrees, everything fits very well. We only take 3 of the four dining chairs with us, one for the desk and 2 for the dining table. I like the mobility of the table, but wish I could find a way to make it more sturdy without screwing it down again. Oh well, I guess we can't win them all.
Joy
|
|
|
06-05-2006, 04:42 AM
|
#8
|
Established Member
Join Date: Apr 2006
Location: Glendale
Posts: 42
M.O.C. #5692
|
I moved the table in our 2955 by just rotating it 90 degrees and placing it in the corner. I only carry 3 chairs, 2 on the kitchen side and 1 on the end near the sofa. When I moved it I just removed the wooden plugs and screws the replaced them after the table was relocated. It has worked well for us. My complaint with the original location was attempting to get into the chairs near the wall due to the leg braces for the table. When you turn the table be sure to put the extension end towards the sofa. Good Luck
|
|
|
06-05-2006, 05:02 AM
|
#9
|
Montana Master
Join Date: Feb 2004
Location: Wetumpka
Posts: 4,936
M.O.C. #1105
|
There are actually 2 or 3 different styles of tables that come in the Montanas. Our table has a large (too large) pedestal base, others have a trestle tables, either with an extension or without.
|
|
|
06-05-2006, 07:16 AM
|
#10
|
Montana Master
Join Date: May 2005
Location: Fall Creek
Posts: 1,332
M.O.C. #3699
|
Thanks for all the info, but specifically what I wanted to know is there a problem screwing the table back into the slider floor at a slightly different location? I don't know whats under the carpet didn't want to hurt anything.
__________________
Bob and Nancy Kassl Fall Creek, Wisconsin
2015 Montana 3440RL Legacy Edition, G614's, Pressure Pro TPMS, Dish Tailgaters
2016 GMC Sierra Denali 3500 CC SRW, Iridium Metallic, Duramax Allison Transmission
|
|
|
06-05-2006, 08:14 AM
|
#11
|
Montana Master
Join Date: Feb 2004
Location: Wetumpka
Posts: 4,936
M.O.C. #1105
|
I think what everyone is trying to indicate from their responses is that you can move it wherever you want, as long as the screw holes aren't too close.
|
|
|
06-05-2006, 05:38 PM
|
#12
|
Montana Master
Join Date: Aug 2004
Location: Cedar Rapids
Posts: 4,876
M.O.C. #1944
|
I moved ours out so that the shade could easily be moved up and down. Yes you can screw it back down without any problem. In fact, I move ours out and found that it was a little more difficult to walk past it with the slides in. So, yesterday I moved the table back to its original spot and will struggle with the shade as necessary. Actually, I leave the shade down all the time since I have my flat screen computer monitor sitting on the table when we are parked.
I had considered turning the table but in our rig that wouldn't work. We have a printer-copier on one side of the table in the corner and a laser printer on the floor on the other side of the table next to the sofa end and the wall.
Don't be afraid to experiment.
Orv
|
|
|
06-08-2006, 07:36 AM
|
#13
|
Montana Master
Join Date: Oct 2005
Location: Caldwell
Posts: 825
M.O.C. #4855
|
You can move the table anywhere you want. I moved ours,the trestle table, turning it 90 degrees, but I didn't screw it back down. Just put two chairs in front of it and it rides just fine. We just completed a 2500 mile trip and had no problems with the table at all.
|
|
|
06-08-2006, 09:38 AM
|
#14
|
Montana Fan
Join Date: Aug 2005
Location: Palm Bay
Posts: 423
M.O.C. #4308
|
I have the same problem with my dining table, as a matter of fact I tried to raise the shade alone the other day at the campground and the white material started to slip out of the channel that joins it to the dark material, when I tried to put it back in before my wife saw it, it tore. Well let me tell you the boss was torqued to the max. I'm in the dog house.
|
|
|
06-08-2006, 04:57 PM
|
#15
|
New Member
Join Date: Jan 2005
Location:
Posts: 9
M.O.C. #3010
|
We unscrewed the table in our 2002 2955, turned it, but didnot replace the screws. Never did have any problems with it moving. Later replaced it with a 42" dropleaf table. That provided many options for use. Again no problems. We traveled this way over 18000 miles. Have done the same in our 2005 3400. So far only 5600 +/- miles. We are impressed with the stability of our tables over all types of roads. Excess chairs are left at home.
|
|
|
06-10-2006, 02:38 AM
|
#16
|
Montana Fan
Join Date: May 2006
Location: Nekoosa
Posts: 412
M.O.C. #5793
|
We moved our dining table to the rear window. Only two chairs are used. We can sit at the table & enjoy the view out the back window. Our two recliner chairs are in the slider. We can view TV better from them.
Lambchop
|
|
|
06-10-2006, 05:26 AM
|
#17
|
Montana Master
Join Date: Feb 2004
Location: Wetumpka
Posts: 4,936
M.O.C. #1105
|
Lambchop, that's what we did, too, and this is our first trip with the new arrangement. We really enjoy looking out the rear window while we eat or work on the computer. Our new loveseat and glider also arrived so we have an all new look. We are REALLY enjoying the loveseat as our original sofa/hideabed was so very uncomfortable. We're in heaven. The loveseat goes very flat so our little granddaughters are sleeping on it at night.
|
|
|
06-11-2006, 03:05 AM
|
#18
|
Established Member
Join Date: Dec 2004
Location: Springfield
Posts: 46
M.O.C. #2677
|
At the western rally at Lake Siskiyou one couple ina 2955RL 2005 moved the table out two inched and rescrewed to the floor. There is plywood under the carpet so just predrill a new pilot hole for the screw. I am going to dothe same before the next trip we take. Getting to the curtain while doing the lean over the table is hard enough without having to fight the curtain also. Good luck.
|
|
|
06-11-2006, 03:30 AM
|
#19
|
Montana Master
Join Date: Jun 2004
Location: Victor
Posts: 940
M.O.C. #1709
|
Bob, You are not going to hit anything in the floor. Use the same screws and you will be ok.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Dinning Set
|
jjackflash |
Trailers, Tow Vehicles & RV related items for Sale |
2 |
11-22-2009 04:28 AM |
MOVE THE TABLE
|
LAURA |
General Discussions about our Montanas |
10 |
01-24-2008 12:47 AM |
Jacknife Sofa and Dinning Set
|
Montana_70 |
Trailers, Tow Vehicles & RV related items for Sale |
2 |
03-01-2006 09:25 AM |
Dinning table 3280RL
|
Montana_390 |
Additions & Improvements |
0 |
04-13-2004 07:32 AM |
Dinning Room Chairs
|
Montana_1131 |
Montana Problems, Problem Solving & Technical Help |
0 |
03-06-2004 08:45 AM |
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|