|
11-23-2014, 01:11 AM
|
#1
|
Established Member
Join Date: Oct 2011
Location: Joppa
Posts: 43
M.O.C. #11888
|
Wiring Harness
In process of preparing 2015 F-350 for towing the Montana. Was on line trying to order the Bargman 51-97-410 harness. When I put in truck info both E-trailer and Amazon says wont fit my vehicle.
Anybody on forum using this harness on new 2015?
I cant see Ford changing the standard 7 pin connector for 2015.
|
|
|
11-23-2014, 03:02 AM
|
#2
|
Montana Master
Join Date: Apr 2011
Location: Ione
Posts: 582
M.O.C. #11371
|
What is a Bargman Harness ? I also have a new 2015 F250 and have never heard of it.
|
|
|
11-23-2014, 03:03 AM
|
#3
|
Montana Master
Join Date: Jun 2010
Location: Colorado Springs
Posts: 3,335
M.O.C. #10496
|
Maybe it's just not in their database yet. I doubt that they would have changed the industry standard 7 pin configuration.
__________________
2010 3150RL
LevelUp, Dual 6 volt batteries, Progressive Industries EMS HW50C, Honda EU2000i Generator, Bridgestone Duravis R250 tires, Torklift Glowstep Revolution Stairs, LED Tail lights
2015 RAM 3500 Laramie SRW LB CC Cummins 6.7L Aisin Trans B&W RVK3600
|
|
|
11-23-2014, 03:13 AM
|
#4
|
Montana Master
Join Date: Apr 2011
Location: Ione
Posts: 582
M.O.C. #11371
|
I answered my own question. Looked it up on the internet. When I had the B & W Turn over ball hitch installed in my new truck I also had the harness installed in the bed.
|
|
|
11-23-2014, 04:30 AM
|
#5
|
Established Member
Join Date: Oct 2011
Location: Joppa
Posts: 43
M.O.C. #11888
|
The more I think about it, I think CORattler is correct.
|
|
|
11-23-2014, 05:01 AM
|
#6
|
Montana Master
Join Date: Feb 2007
Location: San Jose
Posts: 526
M.O.C. #6790
|
I take it you are putting a connector in the bed of the truck. The 7 pin should be the same. But the ends that are showing on the Amazon page for connecting to the truck might be different.
My 2014 came already with the connector in the bed.
__________________
2006 Montana 3650RK with Improvements.
2014 Ford 6.7L PSD 4WD CC LB Dually & Hadley's.
|
|
|
11-23-2014, 06:15 AM
|
#7
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
Only thing I can think of is that maybe the wiring harness splice is not compatible with the truck harness which just means you do a manual splice which is what I did for the plug in my truck bed.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
11-23-2014, 06:34 AM
|
#8
|
Seasoned Camper
Join Date: Jun 2013
Location: Hillsdale
Posts: 98
M.O.C. #13509
|
I have a 2015 F350. I have found that 2014 accessories fit the 2015. The suppliers have not updated the data bases. I think about the only thing that changed for 2015 is the turbo and the HP fuel pump. You could call Etrailer and confirm the compability.
|
|
|
11-23-2014, 08:34 AM
|
#9
|
Established Member
Join Date: Oct 2011
Location: Joppa
Posts: 43
M.O.C. #11888
|
Simpson, I think you are right. Was on the phone with e-trailer they wont say one way or the other with out first talking to Bargman. However they do have Draw tight, and a Hopkins T connector that is for 2015 F-350, both look like junk.
By T connector, (this is a three end cord) One end mounts inside bed.
Other end has two plugs. You simply unplug factory harness from 7 pin plug on bumper bracket, Then plug that into new cord, and other end back in plug on bracket. Now you have two 7 pin connector that work.
the Bargman is also a T connector.
|
|
|
11-28-2014, 05:56 AM
|
#10
|
Established Member
Join Date: Oct 2011
Location: Joppa
Posts: 43
M.O.C. #11888
|
Good News Bargman will work just fine. Imagine That
|
|
|
12-01-2014, 10:45 AM
|
#11
|
Established Member
Join Date: Oct 2011
Location: Joppa
Posts: 43
M.O.C. #11888
|
Bargman installed and working fine.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|