Slide not centered

[Darval]

I have a 2019 Montana HC 330RL and the rear of the kitchen slide does not seem to be centered. The sweep on the side toward the front is barely touching the slide and sweep on rear of slide is so tight that the sweep does not come out when I put slide out. Is there an easy way to move the slide over ?

[jcurtis934]

You can find directions for that at the Lippert customer service website. My dining slide is off center, but I just haven't taken the time to redo it yet.

[Darval]

this is a cable slide not rack and pinion or swintech

[phillyg]

From what I can gather from the BAL cable slide documentation, there is no side to side adjustment, as the RV mfgr. permanently installs the BAL frame during construction. I would think this would have been a warranty issue, but not at this late date. Maybe someone else has figured out how to fix, anyone?

[Darval]

Originally Posted by phillyg

From what I can gather from the BAL cable slide documentation, there is no side to side adjustment, as the RV mfgr. permanently installs the BAL frame during construction. I would think this would have been a warranty issue, but not at this late date. Maybe someone else has figured out how to fix, anyone?

I did mention this at my last warranty repair and was told everything looked fine and not to worry. Now sweep on front side of slide isn't touching at all. I think I am going g to try a wedge on other side and bring in slowly to see if it will move over some.