Reset Slide Button

[Gubs]

Is there a slide reset button for my 2020 Montana 3121RL? If so, where is it located?????

[Carl n Susan]

Probably Not. What slides are you referring to? I know the kitchen and dining slides are hydraulic and their electrical circuit for the pump has self-resetting circuit breakers.

The bedroom slide could be hydraulic, cable or Schwintek depending on what Montana used that year. Which type is yours? Only the Schwintek system has a reset procedure but that is to sync the motors.

[rames14]

Gubs, looks like you have two posts going on the same problem. There is a red in-line fuse above the batteries going to the pump. You may want to check that. Also, as mentioned on the other post, check your batteries for full charge. And, make sure you have plenty of fluid in the reservoir. Best of luck.

[RMcNeal]

Gubs, here is the thread where I found a bad switch on my hydraulic slides. ChuckS has some very good troubleshooting info in here too.
https://www.montanaowners.com/forums...ydraulic+slide