Quote:
Originally Posted by Reset19
You need to power the circuit in the dimmer switch with 12 volts. The dimmer pulses the light on/off very fast reducing on time to dim. The other two wires go in place of the switch. I believe the white is ground. The green is +12 volts. I suspect the single green wire goes to the lights in the ceiling.
|
Learned something new here. Didn’t realize that an LED doesn’t dim like an incandescent, but just appears to dim due to a rapid pulsing that simply doesn’t let it reach full brightness. And requires additional circuitry, and wiring, to produce that pulsing. Had to read up on that one. Old brains can learn.
Just a matter of retention.
Linear Mode
