Power Back Feed
I ran into an issue yesterday, I hitched up then plugged in trailer connector then the brake lights came on on my truck like I was hitting the brakes. I thought that is weird, then my brake controller started operating without hitting the brakes. First before that happened I unplugged my connection then back in and it went away. So I thought it was just an electrical fluke.....wrong I plugged back in started to drive off and my trailer brake started to engage by itself fluctuating between 5 and 20 percent. I pulled over and rechecked my electrical. Master switch off check, then I went ahead and manually turned my main breakers off next to the batteries. I did the 80 amp breaker upgrade. As soon as I did that everything went back to normal. Anyone have any ideas over this. By the way, this is the set up I have:
2015 Montana Mountaineer 310RET
2003 Ram 3500
__________________
'03 Ram Quadcab 3500 6 speed manual 4X4
'09 steering, bags, torklift leaf locks, bigwig sway bars
'15 Mountaineer 310RET
Previous Eagle Cap 850, Elkhorn 8.5, Alfa Gold 38RLT
|