Pin Box Bolts loose

[Roadtravelers]

I am changing my pin box from a Roto Flex to a MORRyde Pin Box. The 12 attachment bolts / nuts where snug at best. The bolts are supposed to be torqued to a minimum of 130 FT LBS. We have a 2020 Montana HC 331RL with aprox 600 miles on it.

Need to check your bolts!!!

[BB_TX]

Add axle U bolts and every other screw and bolt you can find to the tighten list. Include all wire connections in your breaker and fuse panels also.

[rohrmann]

The torque on those bolts and nuts depend on the bolts used, as heavier bolts, both by size and grade will require more torque. The chart in the installation instructions provided by MORryde will give you the proper torque for those fasteners. http://www.morryde.com/uploads/downl...structions.pdf