Moving Gas struts

[Bigrig]

Mission accomplished! I moved the lower brackets yesterday and with good success.

After removing the screws and propping up the cargo door, which was heavier then I thought it would be so have something ready, I opened it to where I wanted it, all the way against the slide. Found that the brackets aligned with 2 of the previous holes, easy peasy. Installed 2 screws on each side, ran a test run and what was against the slide with support and the slack in the structs, it now opens within an 1" of the slide instead of 8". And beeje, you where right, they did not move far to gain that access I was looking for.

Thanks
BA