Dexter Brake Assembly

[Leaseit]

The Unit: 2008 3400Rl

And now that i have seached the books and on line and can't seem to get results.

The Question: Does anyone happen to have the Dexter Part Number for the complete Replacement Brake Assembly from Dexter.

Randy

[swanny]

http://www.dexteraxle.com/10__brake_assemblies

Hope this helps

kevin

[scductman]

Kevin Those are 10" he should need 12"x2" IIRC also if you ck on line for a dexter dealer you can sometimes get a lot better price. I got my self-ajust for about +or- 47.00 per wheel from a local dealer. JMHO
Bobby

[Leaseit]

Bobby & Kevin,
i looked up on the dexter web site and came up with these part numbers.
Do these sound close 12X2 Nev-R-adjust 7000# Part Number K23-464-00 (left Side) and K23-465-00 (right side)?

I am trying to get close to a part number and get an have idea of cost before i make a deal on getting them replaced.

Bobby, it looks the price you got was spot on compaired to Dexters on line cost. Thank you.

Amy information is appreciated

Thank you
Randy

[dieselguy]

I agree with Bobby, Dexter's price is way high compared to local vendors ... and you end up with the same thing. We have Redneck Trailer Sales and Trailer Town out here in the midwest with good prices. Buying the whole brake assembly is more cost efficient than buying the pieces. For example, the cost of just the magnet is within about $12 of the entire assembly.

[scductman]

Randy one of the guys on a few weeks ago installed 7000k back plates on 6k axels. I put 6000k on mine did not know they were the same. the 7k has a bit bigger magnet IIRC. the 12x2 is rite I know that and the other # sounds rite. just double ck and good luck.
Bobby