|
|
07-08-2018, 12:24 PM
|
#1
|
Montana Fan
Join Date: Apr 2018
Location: Worthington
Posts: 146
M.O.C. #21597
|
Which antenna
Looking to go with a dish compatible antenna IN MY 3400 RL. (Have dish at home) thinking of the Tailgater, or the playmaker with a compatible Wally receiver and the optional extra hard drive to use as a DVR. Any suggestions or advice will be appreciated.
|
|
|
07-08-2018, 12:38 PM
|
#2
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
I have two Wally's with hard drives, but I use the interior cables so I can't use a Tailgator type antenna that uses the Wally to power it. If you do that, it needs a 25' or less cabel hooked directly to the Wally. I use Winegard G2+'s. Since they power the antenna I have 50' from my ladder mounted one before it gets to the convenience center.
|
|
|
07-08-2018, 02:44 PM
|
#3
|
Montana Fan
Join Date: Apr 2018
Location: Worthington
Posts: 146
M.O.C. #21597
|
Couple questions DQ. Is the winegard easy to set up? And is it easy to take off the ladder mount if you can’t get the SW exposure. I am considering the playmaker with a tripod, and adding a direct connection to the Wally through my entertainment slide out. I only want one TV on satellite. Thanks for the quick response. I would like to get everything ordered and installed before my trip next week.
|
|
|
07-08-2018, 04:04 PM
|
#4
|
Montana Master
Join Date: Jun 2018
Location: Carson City
Posts: 2,017
M.O.C. #21963
|
Do the direct connection from your slide to the cable box and save yourself a lot of grief.
|
|
|
07-08-2018, 04:07 PM
|
#5
|
Site Team
Join Date: Sep 2017
Location: Oro Valley
Posts: 3,932
M.O.C. #20477
|
BNRC,
The Winegard X2 is the best way to go for portable. Bigger dish and will receive either satellite clusters which is great in some areas. Downsides: a little more expensive, physically a little larger and not made for roof or ladder mount.
__________________
Zack and Donna plus Millie and Ranger
2018 3160RL
"Life is too short to stay indoors, enjoy the ride!"
|
|
|
07-08-2018, 04:50 PM
|
#6
|
Montana Master
Join Date: Oct 2012
Location: Puyallup
Posts: 512
M.O.C. #12948
|
Ditto on the X2...so far so good with us too..usually get my ladder and set it on the roof to get best results for us. Had a Tailgater..but didn't have much luck with it.
__________________
2018 3820FK Legacy Package
2013 3750fl
2019 Chevrolet 3500HD High Country Dually
|
|
|
07-08-2018, 06:23 PM
|
#7
|
Montana Fan
Join Date: Apr 2018
Location: Worthington
Posts: 146
M.O.C. #21597
|
Quote:
Originally Posted by Montana Man
Do the direct connection from your slide to the cable box and save yourself a lot of grief.
|
I wouldn’t have thought about putting the conection on the side of the slide. Thanks for the tip.
|
|
|
07-08-2018, 06:30 PM
|
#8
|
Montana Master
Join Date: May 2011
Location: Hixson
Posts: 3,436
M.O.C. #11397
|
I use a Dish Network 1000.2 dish using either an EA Hybrid LNBF or a WA Hybrid LNBF all mounted on a surveyor's tripod and have used as much as 200' of coax so far but have more if necessary. This feeds my Hopper3 tuner that will record up to 16 programs at one time and has a 2TB HD. All works great and was very inexpensive. Once someone gets the hang of setting it up it only takes about 15 minutes to do.
__________________
2018.5 Montana 3791RD
Full Timers 9/1/2010 through 1/16/2020.
|
|
|
07-08-2018, 09:06 PM
|
#9
|
Seasoned Camper
Join Date: Apr 2018
Location: Kerrville
Posts: 71
M.O.C. #21569
|
I use a tailgator, it's simple always works and dish support is exceptional.Went through the side of slide out. Also have a ladder mount and a tripod in case you have to go to the front.
|
|
|
07-08-2018, 10:53 PM
|
#10
|
Montana Master
Join Date: Jun 2018
Location: Carson City
Posts: 2,017
M.O.C. #21963
|
You are welcome. I meant to say satellite box, but a direct connection to the cable box would have saved me headaches as well. I use the X2 also with good results using the non wally receiver. The matching tripod and storage bag make nice options for a complete package.
|
|
|
07-09-2018, 08:55 AM
|
#11
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Quote:
Originally Posted by Bnrc73
Couple questions DQ. Is the winegard easy to set up? And is it easy to take off the ladder mount if you can’t get the SW exposure. I am considering the playmaker with a tripod, and adding a direct connection to the Wally through my entertainment slide out. I only want one TV on satellite. Thanks for the quick response. I would like to get everything ordered and installed before my trip next week.
|
Depends on if a couple of bolts on the top of the ladder is easy for you. My other one has a tripod, but I usually just put it on top of one of the slides.
|
|
|
07-10-2018, 07:22 AM
|
#12
|
Established Member
Join Date: Sep 2017
Location: Camden
Posts: 40
M.O.C. #20575
|
Like WeBeFulltime, we use a DISH 1000.2 that requires you to manually point to receive the satellites. I use an APP (SatFinder Lite) to help minimize time to manually set up. The 1000.2 allow multiple TV's to watch channels and different satellites. I did have to modify the connections on the cable splitter to use more than one receiver.
Goose
|
|
|
07-12-2018, 12:17 PM
|
#13
|
Montana Fan
Join Date: Jan 2018
Location: Box Elder
Posts: 247
M.O.C. #21057
|
Where did you get the cable connection mounted on the side of the slide?
__________________
2018 Montana High Country 331RL
2006 Ram 2500 SRW 4X4 Laramie Quad Cab 5 .9
Andersen Ultimate 20K Hitch Lippert Solid Steps Steady Fast stabilizes
Rex and Patsy
|
|
|
07-12-2018, 12:24 PM
|
#14
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,366
M.O.C. #4831
|
Quote:
Originally Posted by footz1941
Where did you get the cable connection mounted on the side of the slide?
|
Checkout Post #19 in this thread http://www.montanaowners.com/forums/...01#post1105701
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
07-12-2018, 12:27 PM
|
#15
|
Montana Fan
Join Date: Apr 2018
Location: Worthington
Posts: 146
M.O.C. #21597
|
Quote:
Originally Posted by footz1941
Where did you get the cable connection mounted on the side of the slide?
|
I couldn't find one like in the picture, that recessed in. I bought a flush mount from Amazon. I think it will slide past the rubber seals ok. Before I drill that hole, I am going to try the satellite connection in the convenience center. After all, that's what it was designed for. My receiver comes tomorrow so I'll repost how it goes.
|
|
|
07-12-2018, 03:28 PM
|
#16
|
Montana Master
Join Date: Jun 2018
Location: Carson City
Posts: 2,017
M.O.C. #21963
|
You can find that wall plate at Kyle Switch Plates, online. It would be nice if the connection in the convenience center works. It is worth trying that first. Just know that some systems don't function well with coax runs over 50'. In my trailer, over 35' was used up between the convenience center and the satellite box. Count in the poor quality of cabling at manufacturing and the odds are against us.
A switch plate could be installed on the slide where it doesn't need to pass by the rubber seals. I just chose the side of the slide to keep things looking tidy. Let us know how it goes.
|
|
|
07-16-2018, 09:53 PM
|
#17
|
Seasoned Camper
Join Date: Dec 2006
Location: The Dalles
Posts: 94
M.O.C. #6613
|
We've been on the road for 12 years and I carry my antenna with me. I have a hopper and a wireless Wally. Love it
|
|
|
07-17-2018, 09:44 AM
|
#18
|
Montana Fan
Join Date: Jun 2015
Location: Beloit
Posts: 283
M.O.C. #17535
|
Just an option instead of the recessed connector. I found the sat-coax cable under the slide. Since I could not get the sat. cable to work from the convenience center, I figured what the heck. I cut the coax cable under the slide and put a connector on it. Now as soon as I run the slide out and we are set. I connect the coax to that connector and put the tripod where it needs to be. This way I did not have to do any cutting.
Works very well for me
__________________
Steve & Lisa
2015 Montana High Country 353 RL | Sailuns | Kodiak Disc brakes
2015 F-350 DRW Crew Cab | Reese Goosebox
Retired and Lovin’ it!
|
|
|
07-17-2018, 12:44 PM
|
#19
|
Montana Master
Join Date: Jun 2018
Location: Carson City
Posts: 2,017
M.O.C. #21963
|
Quote:
Originally Posted by Twopetes
Just an option instead of the recessed connector. I found the sat-coax cable under the slide. Since I could not get the sat. cable to work from the convenience center, I figured what the heck. I cut the coax cable under the slide and put a connector on it. Now as soon as I run the slide out and we are set. I connect the coax to that connector and put the tripod where it needs to be. This way I did not have to do any cutting.
Works very well for me
|
That is awesome! If there is enough cable inside, you could coax straight into the satellite box and save going through a connector. My X2 is (was) sensitive to connectors and cable length.
|
|
|
07-18-2018, 01:38 PM
|
#20
|
Seasoned Camper
Join Date: Feb 2018
Location: Box Elder
Posts: 55
M.O.C. #21263
|
I have a 2018 3731. We ran RG6 from inside directly to convenience center connector, bypassing all splitters. (There is a diplex behind the entertainment center switch plate...bypass that too). If you bypass all inside splitters with a continuous RG6 cable, the convenience center connection WILL work.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|