Thanks Dale, I should have thought of that, glad you posted before I tried to remove the out side underlayment of the slider. I wanted to do what you suggested some day to see how it all works now I have to.
Thanks again,
Dick
PS. Thanks to the other for your help.
Quote:
quote:Originally posted by MIMF2
Dick,
There is an easier way.
Take the mattress off the bed. Then remove the two plywood sheets that support the mattress. The system will be completely exposed. You will be able to see where the base is bolted to the floor and where the yoke is bolted to the bottom edge of the room.
I don't recall if there is 4 or 6 bolts that go thru the yoke into the room.
Call if you need more help. I'll dig up the prints.
Dale
|