|
Rudi and Ellen,
I hope this helps answer your questions. If not email me and I will try again.
Adding a picture is so very easy.
First of all you must have the picture you want to use in your computer. If you already have one in your computer and know where it is continue....
Go to tinypic.com/
Click on "Browse" and find the picture you want to use and Click on it
Than click on "Host It"
A new screen will open and your picture is now online.
Toward the bottom of the window you will be given 4 locations..
Link
Tag
Img [ IMG]http://tinypic.com/*****[ /IMG]
Url
The IMG is the tag you will want to copy.
and than Paste this tag into your Profile Signature box
Click on the "Submit" button and
VOILA there you are.
There have been a couple of questions about how to use Irfanview to reduce both the viewed size and the file size. For those who don't want to ask, hopefully the following will help. Don't hesitate to ask questions when help is needed. That's how we all learn.
-----
Irfanview -- This is not as difficult as it appears.
1. open picture in irfanview (file/open).
2. Image / Resize/Resample
here's the settings on mine - just need to set these the first time
- check Resample (better quality)
- Lanczos Filter (slowest) -- it's not really slow
- Preserve aspect ratio
3. Either select one of the standard sizes on the right
or
Select Set New Size. If you do this one, then set the following
- 72 dpi (use 72 or 96 for viewing on a screen or 300 for printing)
- Units:Pixels
- put in either the width or the height you want. The other will fill in automatically (to preserve the aspect ratio).
4. Click OK and it should resize it for you.
5. File/Save As
- JPG-JPEG Files in the Save As Type box
- on the box on the right (JPEG - GIF Save Options) select the quality level you want. The higher the number the larger the filesize and longer to load on a slow connection. 30% sometimes looks ok. 50% usually looks good. If not, bump this up about 5% at a time until you are satisfied with the result. Rarely will you need to go above 65% to 75%. You'll want to give the picture a unique name then click the Save button so you can go open it and see how it looks. You can then come back and save with different quality amount if you want. I tend to use names that tell me the settings I used. For example, if the picture was originally named "picture.jpg" then my first resize attempt I might name "picture-640-30.jpg", which tells me I resized it to width 640 and 30% quality.
|
Linear Mode
